Page History

...

1. Go to the Hardware tab in the Systemsettings dialog box (1).
2. Select Createobject -> Video Capture Device in the context menu of the Computer object (2).
   Image Modified
   

   As a result, the basic settings toolbar is displayed.

   Image RemovedImage Added

   Info
   title Note
   Basic settings are set automatically. It is possible to change an ID, object name and parent object.

   
   

3. To create the object, click the Apply button.
4. Select the created object in the object tree (1).
   Image Modified
5. Configure the created object.
   

   1. In the Type list, select the type of the video capture card installed on the Server (2).

   2. Specify the PCI channel by selecting the value in the PCI channel list (3). For cards based on one chip model (ADC) and one driver (see Drivers for video capture cards integrated into the Axxon PSIM™ software section) there is end-to-end allocation of PCI channels that starts with ‘00’.

      Info
      title Note
      While configuring SC300Q16 (FX4) or SC300D16 (FX8) or SC330Q16 (analogue of SC300Q16) or SC330D16 (analogue of SC300D16) video capture cards, take into account the correlation between the color of BNC video input interface cable and PCI channel specified by Axxon PSIM™ software  (see Features of video subsystem configuration section).

      
      

      Image Added 
      Image Removed
      PCI channels allocation for cards based on one chip model (ADC)
      Image RemovedImage Added
      PCI channels allocation for cards based on different chip models (ADC)
      
      

   3. In the Signal list, select the type of video input (PAL or NTSC) (4).

      Info
      title Note
      When Stretch VRC 6004, VRC 6008, VRC 6416 and VRC 7008L cards are used, the video input (PAL or NTSC) is selected automatically depending on the camera connected to the card. Change of this parameter does not affect the card operation.

      
      

      Info
      title Note
      When SL16-200 (FX116)/FX416 cards are used, Axxon PSIM™ software is to be restarted after changing the video input format. Otherwise, the previous settings are active.

      
      

   4. In the Resolution list (5) select the Standard, High or Full resolution with which the video signal is captured.  This action is to be carried out when WaveHub, LinuxHub or LinuxServer are configured, otherwise this step can be skipped.

   5. Specify allowable frame rate for the card by setting the Speed slider into the corresponding position (6).

      Value	Description
      Max	Maximum allowable sum of video frame rate
      Mean	Half of allowable sum of video frame rate
      Min	One third of allowable sum of video frame rate

      
      

   6. Click the Apply button to save the changes.

...