Page History

...

1. On the Logic tab, select the required element in the table and click the Edit button.
   Image Modified
2. If necessary, in the Step description field (1), enter the text that will be displayed in the column to the left opposite next to the element.
   Image RemovedImage Added

3. From the Number of elements list (2), select the required number of radio buttons.

   Info
   title Note
   The maximum number of elements is determined by the possible number of columns when displaying you display the logic (see Configuring the display of logic).

4. In the Element name fields (3), enter the values ​​of the radio buttons.
5. From the Number of conditions list (4), select the number of different logics
used for
6. to proceed the event handling. In this case, each logic implies the value ​​that the operator selected. For each value,
it is possible to
7. you can set the next element to display.
8. If
it is necessary
9. you want to display the same element
for
10. at any selected value,
then
11. set up this element in the Logic group (5). If you use several logics
are used
12. ,
then
13. set up each logic settings in the Logic [N] group (6), where N is the logic number.
Do
14. To set it up, do the following:
    1. In the Conditional transition field, select the element that
should
15. 1. must be displayed next.
    2. If
at the same time it is necessary
16. 1. you also want to execute a macro
command
17. 1. , select it from the Macro list.
Select the
18. 1. Select the value of the radio button, at which the above actions will be performed.
19. Click the OK button.

Example of displaying the Radio button element:

Image Modified

Configuring the radio button is complete.