Page History

The BACnet object corresponds to the BACnet device channel. It is created automatically during the devices search (see Activation of the BACnet Wrapper integration module and the search for BACnet devices search).

To add a BACnet object manually or to configure a BACnet object manually, do the following:

1. Go to the the settings panel of the Bacnet Object object settings panel, which object that is created on the basis of the the Bacnet Device object.
   Image Modified
2. In From the Object Type drop-down list (1) , select one of the channel types.
3. In the ID field (2) , enter the identification number of the channel.
4. In From the Subscribe drop-down list (3), select the method for monitoring the changes in the values of the BACnet object values:
   1. None - No —no subscription. The changes in object parameters changes are not monitored.
   2. Normal - Standard —standard subscription type. When the object 's parameter changes, the value is immediately sent to the BACnet Wrapper integration module.

   3. Read properties (not recommended) - Parameters —parameters reading at a specified time interval. If this subscription method is selected, the Update time field (4) becomes available. Enter

      1. In the Update time field, enter the time period in

      milliseconds for

      1. milliseconds for reading the parameters of the BACnet object

      in this field

      1. .

         Info
         title Note
         Select the Read properties (not recommended) subscription method only if the standard subscription method

      does not

      1. doesn't work.

Configuring the Configuration of the BACnet object is complete.