Page History

Face contacts search allows you to find in the archive all people who contacted with any person for a specified time.

The search algorithm works as follows:

1. Finds all people in the archive who look like the person from the uploaded photo.
2. Analyzes the archive fragments, in which there is a person from the photo and other people are present as well.

To search for face contacts, do the following:

1. Set the search interval (see Setting a search interval).
2. Set the
minimum
3. similarity level (in %) between the face in the photo and the faces from the archive (1). If the similarity level is below the set value, these results
will be
4. are ignored during the search.
   
Image Removed

5. Info
   title Note
   By default, the similarity level is 75%. Starting with the Axxon One 2.0.10, the minimum allowable similarity level is 40%.

   Image Added
6. Select a photo of the person whose contacts you want to find (2). Supported formats: png, jpg, jpeg, jpe. When you click the face in the
surveillance
7. Surveillance window, this face
will be
8. is selected for search.
If
9.  If you do not select a photo, then all faces recognized during the specified time
will be
10. are displayed.
To
11.  To delete a photo from the search, click the Image Modified button.
12. Set the minimum contact time of other persons in the frame with the person on the photo in the MM:SS format (3). If the contact time is below the specified value, these results
will be
13. are ignored during the search. The maximum contact time is 59 seconds.

14. Click the Search button Image Added.

    Info
    title Note
    Once

launched

15. started, the search can be stopped at any time. To do this, click

the

16. the Stop button, which appears in place of the Search button.

This starts a search based on the defined specified criteria.

The search results panel will display displays video frames that contain persons who contacted with the person on the photo. Recognized faces will be highlighted are outlined with a red frameborder.

To instantly export a face image from the frame, do the following:

1. Click a face track in the
surveillance
2. Surveillance window.
3. Click the Image Modified button (4). 

The face image will be is saved to the folder specified in the settings (see Configuring export options).