To configure the Barcode detectorTo create the detection tool, do the following:
- Go to the Detection ToolsDetectors tab.
Below the required camera, click Create… → Category: Retail →Barcode Detection detector.
By default, the detection tool detector is enabled and configured for operation. Depending on the required tasks, you must select a specific type of barcode for detection.
If necessary, you can change the settings parameters of the detection tool parameters detector given in the table:
| Parameter | Value | Description |
|---|
| Object features |
| Record objects tracking | Yes | The metadata of the video stream is recorded to the database by default. To disable the parameter, select the No value |
| No |
| Video stream | Main stream | If the camera supports multistreaming, select the stream for which detection is needed |
| Other |
| Enable | Yes | The |
detection tool | detector is enabled by default. To disable the |
detection tool the | the No value |
| No |
| Name | Barcode |
Detection detection tool | detector name or leave the default name |
Track lifespan (starting with Detector Pack 3.14)
| Yes | By default, the parameter is disabled. If you want to display the track lifespan for an object in seconds, select the Yes value |
| No |
| Barcode type | Aztec | Select the type of barcode that will generate |
alarms | events from the detector when detected |
| DataMatrix |
| PDF417 |
| QR code |
| Linear |
Decode key frames | Yes | By default, the Decode key frames parameter is enabled. In this case only key frames are decoded. To disable the parameter, select the No value in the corresponding field.
This parameter reduces the load on the Server, but at the same time the detection quality decreases. We recommend enabling this parameter for "blind" (without video image display) Servers on which you want to perform detection.
For the MJPEG codec decoding isn’t relevant, as each frame is considered as a key frame.
| Note |
|---|
|
The Number of frames processed per second and Decode key frames parameters are interrelated. If a local Client isn’t connected to the Server, the following rules work for remote Clients: - If the key frame rate is less than the value specified in the Number of frames processed per second field, the detection tool will work by key frames.
- If the key frame rate is greater than the value specified in the Number of frames processed per second field, the detection will be performed according to the set period.
If a local Client is connected to the Server, the detection tool will always work according to the set period. After disconnecting the local Client, the above rules will be relevant again. |
No | Select a processing resource for decoding video streams. When you select a GPU, a stand-alone graphics card takes priority (when decoding with NVIDIA NVDEC chips). If there is no appropriate GPU, the decoding will use the Intel Quick Sync Video technology. Otherwise, CPU resources |
will be | are used for decoding |
| CPU |
| GPU |
| HuaweiNPU |
Mode the a processor for the neural network |
operation—CPU, one of NVIDIA GPUs, or one of Intel GPUs (see General information on configuring detection) |
| Nvidia GPU 0 |
| Nvidia GPU 1 |
| Nvidia GPU 2 |
| Nvidia GPU 3 |
| Intel NCS (not supported) |
Intel GPU |
| Intel HDDL (not supported) |
| Intel Multi-GPU |
| Intel GPU 0 |
| Intel GPU 1 |
| Intel GPU 2 |
| Intel GPU 3 |
| Huawei NPU |
| Neural network file | | |
unique custom neural network, select the corresponding file. |
To ensure the correct operation of the neural network - You cannot specify the network file in Windows OS. You must place the neural network file locally, that is, on the same server where you install Axxon One.
- For correct neural network operation on Linux OS, place the corresponding file
|
|
must be located - locally in the /opt/AxxonSoft/DetectorPack/NeuroSDK directory
|
|
. - or in the network folder with the corresponding access rights.
- If you use a standard neural network (training wasn't performed in operating conditions), we guarantee the overall accuracy of 80-95% and the percentage of false positives of 5-20%. Standard neural networks are located in the C:\Program Files\Common Files\AxxonSoft\DetectorPack\NeuroSDK folder.
|
|
| Number of frames processed per second |
20| 10 | Specify the number of frames for the |
detection tool | detector to process per second. The value must be in the range [0.016 |
; Detection detection tool | detector type (non-editable field) |
If By default, the entire frame is a detection area.If necessary, in the preview window, set:
- one or more detection areas
...
To save the parameters of the detection tooldetector, click the Apply 
Image Removed button
Image Added button. To cancel the changes, click the Cancel 
Image RemovedImage Added button.
The Configuring the Barcode Detection is configured.
Image Removed detector is complete. If necessary, you can create and configure the necessary sub-detectors on the basis of the Barcode detector (see Standard sub-detectors).
Image Added
If necessary, you can search for a barcode in the archive. You can search by the text that was is recognized during barcode detection (Search by barcode).
