Go to documentation repository
Page History
The Uragan module can be set It is possible to record the a video image received by the camerasignal received from a LP recognition video camera during a predetermined time interval. If this function is enabled, the recording starts automatically when the LPR channel recognizes an LP number. The duration of the recording can also be specified.
| Info | ||
|---|---|---|
| ||
In case of heavy traffic, when subsequent LP numbers are registered in a time period smaller than that specified, the video signal is recorded continuously. |
...
- Go to the LPR channel object settings panel (2), corresponding to the activated Auto-Uragan or CARMEN-Auto module (see Activating the program module, used for identifying the plates section).
Set the Auto recording checkbox to enable recording the video upon recognizing an LP number (31).
Info title Note. For correct auto recording when working with the IntLab-Carriage program module specify the Pre-alarm record parameter in the settings panel of the Camera object (see Configuring video in the Pre-alarm record mode).
In the field next to the checkbox (42), specify for how many seconds the video should be recorded after LP number recognition.
Info title Note. Zero (0) in this field means that the recording starts at the moment of LP recognition and continues indefinitely.
- Click Apply (53).
The auto recording setup is complete.
Overview
Content Tools