Page History

To create necessary ATM-Intellect Workstation objects, do the followingObjects creation in the hardware tree is performed as follows:

1. Go to the Hardware tab of the System settings dialog box (1).
2. Create the IIDK Interface object (21). Set the ID number the identifier of the IIDK Interface object (32).
   Image Modified
3. Then create Create the ATM-Intellect Workstation object on the basis of the Computer object . On its setting panel(1). On the settings panel of this object, in the IIDK interfacefield  field (2), enter the identification number identifier of the previously created IIDK interface object created on step 2.Interface object.
   Image Modified

4. Create the required number of child Surveillance

   object objects corresponding to the connected surveillance objects

   Object objects (1) on the basis of the ATM-Intellect Workstation object. When you create these objects, specify the same ID (2) as in the ID field on the settings panel of the corresponding Surveillance object object created

   under

   on the basis of the ATM-Intellect Pro object.
   Image Modified

   Info
   title Note

...

The ID and Name fields must not contain underscores (_) or backslashes (\), the ID field is limited to 9 characters and must not contain spaces.

1. It is not necessary to manually create the Surveillance Object objects based on the ATM-Intellect Workstation object. They will be created automatically upon successful configuration of the communication between the ATM-Intellect Pro and the ATM-Intellect Workstation with the name and identifier specified on the ATM-Intellect Pro side (see Setting up a connection between ATM Intellect Pro and ATM Intellect Workstation)

...

1. .

   
   

Objects creation is completed.