Page History

The Person The Person location tracker software module is configured on the Person location tracker object settings panel. This object is created under the on the basis of the Camera object on the Hardware tab of the System settings window.

The Person The Person location tracker software module is configured as follows:

1. Go to the Person location tracker object settings panel.
   
2. Set the Show objects on image checkbox (1) if , if it is necessary to highlight the detected object with a frame in the Monitor object interface windowwhen viewing live video.

3. In From the Device drop-down list (2) , select the device where the person location tracker will neural network will operate.In the Interval between the analyzed frames (ms) field (3), enter the interval between the analyzed frames in milliseconds. The value must be in the range of 30 to 10000

4. Select the required neural network file with the tracking model (3).

5. In the Frames processed per second [0,016, 100] field (4), set the number of frames per second that will be processed by the detection tool.

   Note
   title Attention!
   For scene with static people, the FPS value should be at least 2. For scene with moving people—at least 4. The larger this value, the higher the accuracy of pose detection, but the greater the CPU load. With FPS=1, the accuracy will be no less than 70%. This parameter varies depending on the object speed of movement. To solve typical tasks, FPS value from 3 to 20 is sufficient. Examples: pose detection for moderately moving objects (without sudden movements)—FPS=3; pose detection for moving objects—FPS=12.

   
   

6. In the Object life span (ms) field (45), enter the time in milliseconds in which the found object will be considered as disappeared from the frame.

7. Click the Settings button (56). As a result, the Detection settings window will open.
   Image Modified

   1. Click the Stop video button (1) to capture the video image.

   2. Click the Area of interest button (2) and specify the area in which the Person location tracker will operate (3).
      Image Added

      Info
      title Note
      To delete the selected area, click theImage Removedbutton (4)Image Addedbutton.

      
      

   3. Click  the OK button (54).

8. Click the Apply button (67).

9. Perform pose detection configuration (see Configuring the pose Configure the Pose detection (see Configuring the Pose detection) or the Shooter detection (see Configuring the Shooter detection).