Page History

The push notifications are configured in the  PushesNotifications section as follows:

Image Modified

In the Notifications period parameter (1) select the autoupdate interval for events:

• No limit (push notification will be displayed at the moment of event);

• 5 seconds;

• 10 seconds;

• 1 minute.

Set the Show images checkbox (2) to display the images in push notifications.

...

...

1. To enable the push notifications receiving, perform the following actions in the direct order: 

   1. Connect to the required Axxon Next Server (Server (to Axxon Next - only via AxxonNet, to Intellect - directly, see Connection and Server operations in AxxonNet client on Android OS).   

      Note
      title ImportantAttention!
      To receive push notifications from the Axxon Next Server, connect do the following: Connect this Server to AxxonNet (see AxxonNet Setup and Operation). The push notifications from Axxon Next Server can be sent to mobile devices automatically and manually when initiating an alarm event: To send push notifications automatically, it is necessary to configure the corresponding macro to initiate an alarm event on the detector (see Trigger an alarm). Manual alarm event initiation (see Manual Initiation) also initiates sending push notifications to mobile devices. (see Configuring Macros). In Axxon Next up to version 4.5 manual initiation of sending push notifications is also available.. In Axxon Next version 4.5 and higher, manual initiation of sending push notifications is not possible. To receive push notifications from the Intellect Server, it is necessary to activate and configure receiving push notifications in Intellect (see Configuring the Events filter for the Web-server 2.0 module).

      
      

   2. Subscribe to push notifications on the Status tab On the Status tab, go to the Pushes section and click SUBSCRIBE (see The Status tab in AxxonNet client on Android OS).

   3. Make sure the Android device has access to AxxonNet notifications.
      Image Removed

2. In the Push notifications period parameter select the frequency of receiving notifications. During the specified time interval, only one last notification will be received from each camera. All previous notifications will be discarded.

   • No limit;

   • 5 seconds;

   • 10 seconds;

   • 1 minute.

   Info
   title Note
   After changing the notifications period, it is necessary to restart the application.

   
   

3. Set the Show images checkbox to display the camera images in push notifications.

4. Set the Local notifications checkbox if it is necessary to enable the ability to receive local notifications (it is not recommended to enable this parameter, for details see Configuring the local notifications in AxxonNet client on Android OS)Push notification is sent only when the alarm on camera is detected. If you don't receive push notifications, restart the Android device.