Page History

...

• a block of playback control keys (6 keys on the left: the record button is triggered after pressing a button on the joystick);
• block of keys for control of focus, zoom, aperture and PTZ presets (8 keys);

The following keys to manipulate the device interface are also available (not related to Intellect):

• Pressing the button on the remote control joystick (OK) (equivalent to pressing the ENTER key on the Server / URMA / URMM Intellect PC, to which the remote control is connected).
• Cancel the action / return one step back in the remote control menu (equivalent to pressing the ESC key on the Server / URMA / URMM Intellect PC, to which the remote control is connected).
• Numbers / letters are entered from the numeric keyboard, the mode (upper/lower register, digits) is switched by the SHIFT key on the Server / URMA / URMM Intellect PC to which the console is connected).
• Moving through the menu items and within the fields is carried out by deviating the remote control vertically / horizontally.

Configuring the

...

PTZ control device before adding it to Intellect

Before creating the corresponding object in Intellect software package, configure the UNIVIEW KB-1100 PTZ control device as follows:

1. Switch on the control device.
2. Enter username and password in the device display. The default credentials are as follows:
   
   1. login: admin
   2. password: 123456
3. Configure the device network configuration. To do this, in the Local Cfg -> Net Cfg menu, set the following settings:
   
   1. IP address
   2. Mask
   3. Gateway
4. Add Intellect Server/Client to the internal configuration of the device. To do this, in the Dev Manage -> Manual Cfg -> Add Dev menu, set the following settings:
   
   1. ID – enter any number (range: 1-240, the number must not coincide with the ID of the remote control or other already added device).
   2. name – enter a string (1-8 characters).
   3. DType – select VM (VideoManagementSystem, i.e. Intellect).
   4. LType – select NetWork (the device is integrated for connecting to Intellect via the network).
   5. After selecting LType, press the button on the joystick and enter the IP address of the Intellect server  Server/Client and the port used (60000 by default).
5. Connect to the Intellect Server/Client added in the previous step. To do this, enter the above ID in the FindDev -> Dev ID menu or select the found profile in the Dev Manage -> Search Dev menu.
6. If the device is found, information about it will be displayed on the device display.
7. Press on the ID field. As a result, it will be possible to work with the control device in Intellect.

...