Page History

Create and configure the Camera object as follows:

1. Select Create object -> Camera in In the context menu of the Video Capture Device objectcapture device object, select Create object → Camera.
   
   

   
   

2. As a result, the basic settings toolbar is panel of the object will be displayed.

   Info
   title Note
   Basic settings are specified automatically. It is possible to change an the ID, object name and parent object.

   

3. To Click the Apply button to create the object, click the Apply button.
4. Select the created Camera object in the object In the objects tree (1), select the created Camera object.
   Image Modified
5. Configure the created object.:
   

   1. In the Channel number list (2), select a physical video output of the card to which the camera is connected (see Features of video subsystem configuration section).

      Info
      title Note
      Channel numbers within one Video capture card device object must not be repeated.

      
      

   2. In the Resolution list (3), select the resolution with which video signal will be captured: Standard – —minimum accepted value for the card, High – —mean value, and Full – —maximum accepted value with which a video signal is captured.

      NoteNote

      Info
      title Note
      title	Resolutions supported by video capture cards are given in Appendix 4. Technical specifications of video capture cards
      Info
      title	. While When configuring the video camera which is connected through the SC590N4 video capture card, in the Axxon PSIM software , the frame resolution is to should be set as the resolution set on the video camera. Otherwise, artifacts can appear on the video image.
      Info
      If Stretch VRC-6404 HD video capture card is in useused, then restart Axxon PSIM after changing resolution.

      
      

      Info
      title Note
      Changing the Resolution doesn't guarantee that the resolution .  of the received video signal will change, as it depends among other things on the internal settings of the camera itself. If you need to specify certain streams strictly, it is better to configure multistream video.

      
      

   3. Click the Apply button to save the changes

Configuring the Camera object is completed.

Repeat these actions steps for all cameras connected to the card.

...