Page History

The controller The ZK C3-100 is , ZK C3-200, ZK C3-400 controllers are configured on the settings panel of the corresponding objects AC ZK Controller C3-100 object which is , AC ZK Controller C3-200 and AC ZK Controller C3-400 which are created on the basis of the AC ZK Teco object on the Hardware tab of the System settings dialog window.

To configure the ZK Teco controllersTo configure the C3-100 controller, do the following:

1. Go to the settings panel of the AC ZK Controller C3-100 objectcorresponding ZK Teco controller.
   
2. From the Gate: drop drop-down list (1), select the type of controller connection : (see Configuring the connection via Ethernet or standard or Configuring the connection via RS-485 standard (1).
3. In the Password: field  field (2), enter the password for controller connection (2).
4. In the IP: field If the Ethernet connection type was selected, then enter the IP - address of the controller in the IP field (3).
5. If the the RS-485 standard connection type was selected, then select the connection COM port number from the Address drop-down list (3).

6. From the Anti-passback

   : drop

    drop-down list (4), select the

   rule

   mode of anti-passback operation

   (4)

   :

   Mode

   Disable – the

   Description	Controller
   Disable	The anti-passback function is disabled	All controllers
   Readers of Door 1	The anti-passback function is enabled between the readers of Door 1	ZK C3-100, ZK C3-200
   Readers of Door 2	The anti-passback function is

   disabledReaders of Door 1 – the

   enabled between the readers of Door 2	ZK C3-200
   Readers of door 1, readers of door 2	The anti-passback function is enabled between the readers of Door 1 and Door 2 respectively	ZK C3-200
   Door 1 and 2	The anti-passback function is enabled between the readers of Door 1 and Door 2	ZK C3-200, ZK C3-400
   Doors 3 and 4	The anti-passback function is enabled between the readers of Door

   1.
7. The Interlock function is always disabled for the single-door controller (5).

8. 3 and Door 4	ZK C3-400
   Doors 1 and 2, doors 3 and 4	The anti-passback function is enabled between the readers of Door 1, Door 2, Door 3 and Door 4	ZK C3-400
   Doors 1, 2 and doors 3, 4	The anti-passback is enabled between Door 1, 2 and Door 3, 4	ZK C3-400
   Door 1 and doors 2, 3	The anti-passback is enabled between Door 1 and Door 2, 3	ZK C3-400
   Door 1 and doors 2, 3, 4	The anti-passback is enabled between Door 1 and Door 2, 3, 4	ZK C3-400

   
   

9. From the Interlock drop-down list (5), select the mode of doors interlocking:

   Mode	Description	Controller
   Disable	The interlock function is disabled	All controllers
   Door 1 and 2	Doors 1 and 2 are interlocked mutually	ZK C3-200, ZK C3-400
   Door 3 and 4	Door 3 and door 4 are interlocked mutually	ZK C3-400
   Doors 1, 2 and 4	Door 1, door 2 and door 4 are interlocked mutually	ZK C3-400
   Doors 1 and 2, doors 3 and 4	Door 1 and door 2 are interlocked mutually, door 3 and door 4 are interlocked mutually	ZK C3-400
   Doors 1, 2, 3 and 4	Door 1, door 2, door 3 and door 4 are interlocked mutually	ZK C3-400

   
   

   Info
   title Note
   To open one of the interconnected doors, the other interconnected doors in the group must remain closed. This means that in a group of interconnected doors, only one door can be opened at a time.

   
   

10. From the Backup period drop-down list (6), From the Backup period: drop-down list select the time interval in minutes for saving the database backup (6).automatic backup of data of the specified type (see Managing the configuration of a ZK controller). 

11. Set the Watch dog checkbox to activate the control mode (7(7) to enable the automatic data backup.

12. Click the Apply button (9).

    Info
    title Note.
    The version of firmware and serial number of controller will automatically display in the corresponding fields while connecting the controller After a successful connection with the controller is established, the firmware version and the controller serial number will automatically be displayed in area (8).

13. Click the Apply button (9).

14. 
    

Configuring of the ZK C3-100 controller is , ZK C3-200, ZK C3-400 controllers is now completed.