Go to documentation repository
Page History
...
The displays can be assigned to the workstations on the settings panel of the Display object. The figure below shows the configuration of two objects: Display 1 and Display 2. According to the configuratonconfiguration, the Display 1 will be available to all computers of the video surveillance system, while the Display 2 will be available only to the Y-GAVRILYCH workstation LAPTOP computer.
Info | ||
---|---|---|
| ||
If the display assigning is performed from the Server which is not connected with some Servers of the distributed system (the corresponding checkbox in the Architecture tab is not set – — see the Configuring the interaction of distributed system components), the data from this Server will not be displayed in the list of computers to which the current Display can be assigned. The settings of these Servers will not change after completing the display assignment. |
Assigning displays via Wizard
Assign To assign the displays via Wizard as follows, do the following:
- Click the Wizard button on the Interfaces tab (1). The Display settings window opens.
- Select the computer in the Computer column (2).
- Set the checkboxes next to the Display objects to assign them to the selected computer (3).
Repeat steps 2-3 for all required Computer objects.
Info title Note Use the Copy (4) and Paste (5) buttons to copy the display list. For example, to assign the same displays to the WS2 LAPTOP-A computer as those assigned to the S-UYUTOVA COMPUTER 1 computer, do the following:
1. Select the S-UYUTOVA COMPUTER 1 computer in the Display settings dialog box.
2. Click the Copy button (4).
3. Select the WS2 LAPTOP-A computer in the Display settings dialog box.
4. Click the Paste button (5).- Click the OK button (6).
...
Assigning the displays via the display activation allows displaying the objects of several displays simultaneously. Assing Assign the displays via the display activation as follows:
...