Page History

...

To create the Queue length threshold crossing report, do the following:

1. Select the Queue length threshold crossing report type report (see Selecting a type of reports by Queue Length detectors) . As a result the dialog box for specifying the report parameters will be displayed.
   Image Removedfrom the list of the available Queue Length detectors reports.
2. Set the following report parameters:
   

   From the Receiving data period

    drop

   drop-down list (1), select the time period for which the report should be created

   (1)

   .
   Image Added

   Info
   title Note
   If the Custom 2 time period is selected,

   enter the

   enter the date of start and end

   dates of the time period

   periods for which the report should be created in the from and to fields using the Calendar tool. Click the Image Modified button near the corresponding field to use

   the 

   the Calendar tool.

   It

   It is also necessary to enter the time of start and end

   periods

   period using the Image Modified button.

   
   

3. In the Threshold (people) field (2), set the number of people in the queue, which is considered a thresholdmaximum.
4. In the Repetition avoidance interval (min.)  Data averaging interval field (3), enter the calculation step of the queue length—the time interval between the congestion values of the monitored area. The report displays the average values of the queue length over a time equal to the calculation step. The maximum and minimum values of this field depend on the selected step type (4).
5. From the Step type drop-down list (4), select the type of data averaging:
   1. empty—the data will be displayed as is, i.e., it won't be averaged. The Data averaging interval field (3) isn't taken into account;
   2. seconds—the data will be averaged by seconds with a step in the range 1-60 from the Data averaging interval field (3);
   3. minutes—the data will be averaged by minutes with a step in the range 1-60 from the Data averaging interval field (3);
   4. hours—the data will be averaged by hours with a step in the range 1-24 from the Data averaging interval field (3);
   5. days—the data will be averaged by days with a step in the range 1-31 from the Data averaging interval field (3) time in minutes during which the event of exceeding the threshold of the queue length will not be generated.
6. In the Detectors field (45), set the checkboxes for those next to those Queue length detection objects objects, the information from which information should be displayed in the report. Click All to select all found/available detectors, click None to deselect. Click Show all to expand the detectors structure. Click Hide all to hide the structure.
7. From the Sort by drop-down list (6), select how the data will be sorted in the report: by detector Name (selected by default) or by the detector Number.
8. To create a report, click Execute (5)click the Execute button. As a result, a report on all recorded facts of exceeding the queue length for the specified period will be displayed.
   
   The report has a three -sectioned structuresections:
   
   1. Section 1 displays a list of queue length detectors that have recorded the events of exceeding the threshold events for of queue length for the specified period, and the number of recorded events.
   2. Section 2 displays a detailed table of events recorded by the detector selected in section 1, the time of recording for each event, and the number of people in the queue at the specified time. The maximum number of entries on one page of the table is 100.
   3. In section 3, you can watch the video Section 3 displays a video recording of the event selected in section 2.