Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The settings panel of the SIP-device object is shown in the pictures figures below.

Image Modified

Table describes the setting parameters of the SIP-device system object.

Parameter

Method for setting the parameter value

Description

Parameter description

Presented as

Default value

Range of values

The Connection settings group

1The User ID field

Representation

Default value

Value range

1

Identification number

Automatically

Displays the identification number of the SIP-device object in the system

Numbers, letters, periods, hyphen, dash and underscore

-

Depends on the number of the SIP-device objects in the system

2

Name

Enter the value into the field

Sets a name of the SIP-device object in the system

Latin, Cyrillic and service characters

SIP-terminal

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of charactersfrom 1 to 60

3

Disable

Set the checkbox

Sets the state (enabled or disabled) of the SIP-device object in the system

Boolean type

Clear

Setthe SIP-device object is disabled and isn't used

Clear—the SIP-device object is enabled and used

4

SIP-terminal

Select the value from the list

Sets the SIP-terminal parent object for the given SIP-device object

Name of the SIP-terminal objects registered in the system

Name of the SIP-terminal parent object

Depends on the number of the SIP-terminal objects in the system

5Device typeSelect the value from the listSets the icon type to display the device on the MapNames of the available icon types-

No value

touch panel

speaker

camera

microphone

default

6Device prioritySelect the value from the list

Sets the priority of a call from this device in the incoming calls window of the SIP panel

Sequence of numbers-

0–10

The lower the number, the higher the priority and, accordingly, the higher the display in the list.

If the field is left blank, then the priority is considered to be minimal.

Calls from devices with the same priority will be sorted by the time of the call

The Device connection settings group

7User IDEnter the value into
Enter the value in
the fieldSets the SIP-device identification number, i.e. the number to call it
.
IntegerThe
Sequence of numbers
>=0
2
Device IP address
field
Enter the value
in
into the field

For the SIP-server terminal type only.

Sets the SIP-device IP address

.

IP address
1.0.0.
0 - 255The
0–255.255.255.255
3
Password
field
Enter the value
in
into the field

For the SIP-server terminal type only.

Sets the

The password specified on the SIP-device

.

Latin, Cyrillic
letters
and service characters
A line
representing
containing a sequence of any
symbols4The State field
characters (letters, digits, service characters)
StateAutomatically

For the SIP-server terminal type only.

Displays the SIP-device state

---
5The Device type drop-down listIs selected in the listSets the icon type to represent the device on the Map.Names of the available icon types-

SIP client — the SIP-device acts as a client, it can be connected to any SIP-server

SIP server — the SIP-device acts as a server, any SIP-clients can be connected to it

Peer-to-peer terminal type is not supported at the present moment.

6The Device priority drop-down listIs selected in the listSets the device calls priority when displayed on the SIP panelInteger-

0 – 10

The higher the number the higher the priority.

If the field left empty, the priority is considered minimal. 

Table describes the parameters of the SIP-device settings panel.

The Video / Audio tab (only for the SIP-server terminal type).

Table describes the setting parameters of the SIP-device settings panel Video / Audio tab.

Parameter

Method for setting the parameter value

Description

Parameter description

Presented as

Representation

Default value

Range of values

The Video/Audio tab (for SIP-server terminal type only)

Value range

1
The
Video
switch
Set the
switch to the
required
position
radio buttonSets the video camera used for callsSupported options of camera usageOff

Off

— the

—the video is not used during the call

.

SIP camera

— a

—a SIP-device camera connected via the SIP protocol is used

.

Other

— any

—any other camera from the Intellect hardware tree selected from the Camera drop-down list is used

.

2
The
Camera
drop-down listIs selected in
Select the value from the listSets any video camera used for calls

Name of the Camera objects

registered in the system

.

-Depends on the number of the Camers objects in the system
.
3
The
Audio
switch
Set the
switch to the
required
positionSets the microphone used for calls
radio button

Enables or disables the audio during a call

Supported options of audio usageOff

Off

— the

—the audio is not used during the call

.

On

— the

—the microphone of the SIP-device is used

.

during the call

4
The
Microphone
field
AutomaticallyDisplays the name of the Microphone object corresponding to the SIP-device---

The Relay tab (only for the SIP-server terminal type).

Image Added

Table describes the setting parameters of the SIP-device settings panel Relay tab.

Image Removed

Parameter

Method for setting the parameter value

Description

Parameter description

Presented as
Representation

Default value

Range of values

Value range

1
The
DTMF type
drop-down listIs selected in
Select the value from the listSets the type of the tone DTMF
command
signalSupported signal
typein_bound
typessip_info

sip_info—signals are transmitted in the INFO message of the SIP protocol

sip_notify—signals are transmitted in the NOTIFY message of the SIP protocol

in_band

 – the

—the signal is transmitted as normal sound in an audio stream

.

http_bas

signals are transmitted

over

via the HTTP protocol separately from the voice stream

.

sip_info – signals are transmitted in the SIP INFO message.

sip_notify – signals are transmitted in the SIP NOTIFY message.

2
The
Signal duration, ms
field
Enter the value
in
into the fieldSets the time period in milliseconds during which the
command is to
DTMF signal should be sent
.
Integer
Sequence of numbers
>0
3Device connection settings-Opens a pop-up window of connection settings when the http_bas type of tone is selected -Inactive by default-
4NameEnter the value into the fieldSets the name of the command that will be displayed on the SIP-panel Latin, Cyrillic and service characters
A line containing a sequence of any characters (letters, digits, service characters)
5CodeEnter the value into the fieldSets the unique command codeSequence of numbers or HTTP request (for http_bas)

A line containing a sequence of numbers or HTTP request

The Device connection settings pop-up window.

Image Added

Table describes the fields of the Device connection settings window.

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

1Login
group3The Login field
Enter the value
in
into the fieldSets the user name to connect to the SIP-device (BasIP)
SIP device
Latin, Cyrillic
letters
and service characters-A line
representing
containing a sequence of any
symbolsThe Password field 
characters (letters, digits, service characters)
2PasswordEnter the value
in
into the fieldSets the password to connect to the SIP-device (BasIP)
SIP device
Latin, Cyrillic
letters
and service characters-A line
representing
containing a sequence of any
symbolsThe
characters (letters, digits, service characters)
3IP address
field 
Enter the value
in
into the fieldSets the IP address of the SIP-device (BasIP)
SIP device IP address
IP address-1.0.0.
0 - 255
0–255.255.255.255
4The Name fieldEnter the value in the fieldSets the name of the command displayed on the SIP panel Latin, Cyrillic letters and service charactersA line representing a sequence of any symbols5The Code fieldEnter the value in the fieldSets the unique command codeInteger or HTTP request (for http_bas)>0