Page History

Axxon PSIM has the possibility of transmitting the audio signals from microphones to IP devices and of playing back the audio signals with loudspeakers or headphones connected to IP devices.

There are two ways audio signals can be transmitted to IP devices in

...

Axxon PSIM:

...

1. using the Audio player interface object;

...

1. using the

...

1.  Voice notification service system object.

The Audio player object is used to transmit audio signals from the selected microphones to the supported IP devices.

To set up the transmission of audio signals

...

using the

...

 Audio player object, do the following:

1. Go to the Audio player interface object settings panel.
   
2. Set the coordinates and the size of the Audio player interface window, as well as the number of the physical monitor on which the window will be displayed (1).

3. From the dropdown  Device  drop-downlist, select the required IP device (2).

4. From the dropdown  Channel drop-downlist, select the required audio signals playback channel (3).
5. From the dropdown drop-down list in the Number column, select the Microphone object number, from which the audio signal has to be transmitted to the selected IP device (4). Other columns of the table will fill be filled in automatically.
6. Repeat step 5 for each required Microphone objects.
7. Click the Apply button to save the changes (5).

Set Setting up the transmission of the audio signals with the help of usingthe Audio player object is completed.

Info
title Note
To enable audio signals transmission from the microphone to the IP device, click the button (Interception from microphone) in the Audio player interface window.

The Voice notification service object is used to transmit audio files in the WAV format to the supported IP devices. Setting up of the Voice notification service object is described in Setting up the voice notification.