Page History

The Telemetry control panel object is used to register and configure the Universal PTZ control panel interface object in Axxon PSIM . The Universal PTZ control panel interface object that isused to control the PTZ devices.

The settings panel of the Telemetry control panel object is shown in the figure.

Image Modified

Table The table describes the setting parameters corresponding to the elements of the settings panel of the Telemetry control panel object.

Numbers- the into Sets the state of the digital digital .- into Telemetry on into Telemetry control panel interface window- into Telemetry into Telemetry interface ---- Telemetry Telemetry Telemetry Displays Telemetry control panelTelemetry do not Telemetry Low priorityTelemetry the PTZ Telemetry Normal High Telemetry High Telemetry placeDisplays video digital video Telemetry - digital ------------

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	The Identification number* field	Automatically	Displays the identification number of the Telemetry control panel object in the system
Digits, letters, periods, hyphen, dash, and underscore
	NA	A line containing numbers, letters, periods, hyphen, dash, and underscore Depends on the number of
the Telemetry control panel objects in the system
2	The Name* field	Enter the value
in the field	Sets the name of the Telemetry control panel object in the system	Latin alphabet, Cyrillic, digits and service characters	Telemetry control panel	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	The Disable checkbox	Set the checkbox
Disables the Telemetry control panel object in the
video surveillance system with distributed architecture	Boolean type	Clear	Set—the Telemetry control panel object is disabled and isn't used Clear—the Telemetry control panel object is enabled and used
4	The Display drop-down list	Select the value from the list	Sets the Display parent object in the
system with distributed architecture to which the given Telemetry control panel object belongs	Names of the Display objects registered in the system	Name of the Display parent object
	Depends on the number of the Display objects in the system
The Output window group
5	The Monitor drop-down list	Select the value from the list	Sets the number of the monitor for which the coordinates are set	Number of the monitor in OS	1	From 1
to 16
6	The X field	Enter the value
in the field	Sets the X coordinate in the horizontal axis for the upper left corner of the
telemetry control panel
window on the screen	% of the screen width	30	From 0 to M*100, where M is the number of the installed monitors
7	The W field	Enter the value
in the field	Sets the width of the
telemetry control panel window	% of the screen width
NA	From 18 to M*100, where M is the number of the installed monitors
8	The Y field	Enter the value
in the field	Sets the Y coordinate in the vertical axis for the upper left corner of the
telemetry control panel window on the screen	% of the screen height	30	From 0 to M*100, where M is the number of the installed monitors
9	The H field	Enter the value
in the field	Sets the height of the
telemetry control panel
window	% of the screen height
NA	From 34 to M*100, where M is the number of the installed monitors
10	The Current coordinates* Image Added button	Click the button	Sets the current coordinates of the Telemetry control panel object in the X, Y, W, and H fields
NA
NA
NA
11	The Allow window moving checkbox	Set the checkbox	Allows moving the
telemetry control panel using the mouse	Boolean type	Set	Set—allow moving the
telemetry control panel window Clear—disable moving the
telemetry control panel window
12	The Half-transparent window checkbox	Set the checkbox
Sets the display of the telemetry control panel in the half-transparent
way	Boolean type	Set	Set—display the half-transparent
telemetry control panel window Clear—
don't display the half-transparent
telemetry control panel window
Out of the group
13	The Priority drop-down list	Select the value from the list	Sets the priority of the PTZ devices' control	Names of the priorities to control the PTZ devices
Low	Forbidden—control of the PTZ device using the
telemetry control panel is forbidden; Low priority—control of
the PTZ device using the
telemetry control panel is performed after it controls the devices with
normal or
high priority; Normal priority—control of the PTZ device using the
telemetry control panel is performed after it controls devices with
high priority; High priority—control of the PTZ device using the
telemetry control panel is performed in the first
order
14	The Allow presets checkbox	Set the checkbox	Allows saving the position of the PTZ device in the presets	Boolean type	Set	Set—allow saving the position of the PTZ device in the presets Clear—disable saving the position of the PTZ device in the presets
15	The Allow hotkeys checkbox	Set the checkbox	Enables the PTZ device control using the keyboard	Boolean type	Clear	Set—keyboard can be used to control the PTZ device Clear—keyboard hotkeys cannot be used to control the PTZ device
16	The Available cameras with telemetry control field	Automatically
Specifies the
cameras with the PTZ devices	Names of the Camera objects registered in the system	List of all Camera objects registered in the system	Depends on the number of the PTZ devices in the
system with distributed architecture
17	The Selected cameras field	Select by clicking the arrow keys	Sets the
cameras with the PTZ devices that can be controlled using the
telemetry control panel
-
Names of the Camera objects registered in the system	NA
	Depends on the number of the PTZ devices in the
system with distributed architecture
18	The One to the right* Image Added button	Click the button	Moves the selected PTZ device from the Available cameras with telemetry control list to the Selected cameras list
NA
NA
NA
19	The One to the left* Image Added button	Click the button	Moves the selected PTZ device from the Selected cameras list to the Available cameras with telemetry control list
NA
NA
NA
20	The All to the right*Image Added button	Click the button	Moves all PTZ devices from the Available cameras with telemetry control list to the Selected cameras list
NA
NA
NA
21	The All to the left* Image Added button	Click the button	Moves all PTZ devices from the Selected cameras list to the Available cameras with telemetry control list
NA
NA
NA

*Name of the element isn't displayed in the settings panel of the given object.

Page tree

Versions Compared

Old Version 5

New Version Current

Key