Page History

The Satel INTEGRA panel connection is performed on the settings panel of the Satel Panel object created on the basis of the Computer object on the Hardware tab of the System Settings dialog.

Image RemovedImage Added

The panel may be connected to the ACFA Intellect Server via RS-232 or Ethernet interfaces.

Connection over RS-232

To connect over RS-232, do the following:

1. Go to the settings panel of the Satel panelPanel object.
   Image RemovedImage Added
2. Select the RS-232 radio button in the Connection section (1).
3. In the Port list, select the COM-port used for connection (2).
4. Click Apply (3).

Configuring the Satel INTEGRA panel connection is complete.

Connection over Ethernet

To connect over Ethernet, do the following:

1. Go to the settings panel of the Satel Panel object.
   Image RemovedImage Added
2. Select the TCP/IP radio button in the Connection section (1). 
3. Enter the IP address of the panel in the field below (2). 
4. In the TCP port field, enter the connection port (3).
5. Click Apply (4).

Additional communication options are available for the Satel Panel.

Image Removed

1. In the PIN code to control panel you may set the PIN code used to authorize the connection to the control panel (1).
2. Set the Use user PIN code for reactions checkbox to make the panel operators (Intellect users) to enter their own PIN codes to react to events from the panel in addition to the main panel code (2). The user PIN code is set in the Intellect user settings, see User registration and removal.
3. In the Time to second PIN enter field you may select the delay between entering the panel code and the user code in seconds (3).

  The Satel Panel object also enables configuring additional emulations that facilitate the panel operation using the Map (see Working with the Satel INTEGRA Integration Module):

Image Removed

...

Configuring the Satel INTEGRA panel connection is complete.