Go to documentation repository
Page History
The settings panel of the SIP-device object is shown in the pictures figures below.
Table describes the setting parameters of the SIP-device system object.
№ | Parameter | Method for setting the parameter value | DescriptionParameter description | Presented asRepresentation | Default value | Range of values | Value range | |
1 | Identification number | Automatically | Displays the identification number of the SIP-device object in the system | Numbers, letters, periods, hyphen, dash and underscore | - | Depends on the number of the SIP-device objects in the system | ||
2 | Name | Enter the value into the field | Sets a name of the SIP-device object in the system | Latin, Cyrillic and service characters | SIP-terminal | A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60 | ||
3 | Disable | Set the checkbox | Sets the state (enabled or disabled) of the SIP-device object in the system | Boolean type | Clear | Set—the SIP-device object is disabled and isn't used Clear—the SIP-device object is enabled and used | ||
4 | SIP-terminal | Select the value from the list | Sets the SIP-terminal parent object for the given SIP-device object | Name of the SIP-terminal objects registered in the system | Name of the SIP-terminal parent object | Depends on the number of the SIP-terminal objects in the system | ||
| 5 | Device type | Select the value from | ||||||
The Server connection settings group | 1 | The User ID field | Enter the value in the field | Sets the SIP-device identification number, i.e. the number to call it. | Integer | >=0 | 2 | The Device IP address field | Enter the value in the field | For SIP-server terminal type only Sets the SIP-device IP address. | IP address | 1.0.0.0 - 255.255.255.255 | 3 | The Password field | Enter the value in the field | For SIP-server terminal type only Sets the password specified on the SIP-device. | Latin, Cyrillic letters and service characters | A line representing a sequence of any symbols (letters, numbers, service symbols) |
| 4 | The State field | Automatically | For SIP-server terminal type only Displays the SIP device state | - | - | - | ||
| 5 | The Device type drop-down list | Is selected inthe list | Sets the icon type to | representdisplay the device on the Map | .Names of the available icon types | - | No value touch panel speaker camera microphone default | |
| 6 | TheDevice priority | drop-down listIs selected inSelect the value from the list | Sets the priority of a call from this device in the incoming calls window of the SIP panel | IntegerSequence of numbers | - | 0 – 100–10 The lower the number, the higher the priority and, accordingly, the higher the display in the list. If the field is left blank, then the priority is considered to be minimal. Calls from devices with the same priority will be sorted by the time of the call | ||
The Device connection settings group | ||||||||
| 7 | User ID | Enter the value into the field | Sets the SIP-device identification number, i.e. the number to call it | Sequence of numbers | >=0 | |||
| Device IP address | Enter the value into the field | For the SIP-server terminal type only. Sets the SIP-device IP address | IP address | 1.0.0.0–255.255.255.255 | ||||
| Password | Enter the value into the field | For the SIP-server terminal type only. The password specified on the SIP-device | Latin, Cyrillic and service characters | A line containing a sequence of any characters (letters, digits, service characters) | ||||
| State | Automatically | For the SIP-server terminal type only. Displays the SIP-device state | - | - | - | |||
The Video / Audio tab (only for the SIP-server terminal type).
Table describes the setting parameters of the Video / Audio tab.
№ | Parameter | Method for setting the parameter value |
Parameter description |
Representation | Default value |
Value range |
| 1 |
| Video |
| Set |
| the required |
| radio button | Sets the video camera used for calls | Supported options of camera usage | Off | Off |
—the video is not used during the call |
SIP camera |
—a SIP-device camera connected via the SIP protocol is used |
Other |
—any other camera from the Intellect hardware tree selected from the Camera drop-down list is used |
| 2 |
| Camera |
| Select the value from the list | Sets any video camera used for calls | Name of the Camera objects |
registered in the system |
| - | Depends on the number of the Camers objects in the system |
| 3 |
| Audio |
| Set |
| the required |
| radio button | Enables or disables the audio during a call | Supported options of audio usage | Off | Off |
—the audio is not used during the call |
On |
—the microphone of the SIP-device is used |
during the call |
| 4 |
| Microphone |
| Automatically | Displays the name of the Microphone object corresponding to the SIP-device | - | - | - |
The Relay tab (only for the SIP-server terminal type).
Table describes the setting parameters of the Relay tab.
№ | Parameter | Method for setting the parameter value |
Parameter description |
| Representation | Default value |
Value range |
| 1 |
| DTMF type |
| Select the value from the list | Sets the type of the tone DTMF |
| signal | Supported signal |
| types | sip_info | sip_info |
—signals are transmitted in the |
INFO message |
of the SIP protocol sip_notify |
—signals are transmitted in the |
NOTIFY message |
of the SIP protocol in_band |
—the signal is transmitted as normal sound in an audio stream |
http_bas |
—signals are transmitted |
via the HTTP protocol separately from the voice stream |
| 2 |
| Signal duration, ms |
| Enter the value |
| into the field | Sets the time period in milliseconds during which the |
| DTMF signal should be sent |
| Sequence of numbers | >0 | |
| 3 |
| Device connection settings |
| - | Opens a pop-up window of connection settings when the http_bas type of tone is selected | - | Inactive by default | - | |
| 4 | Name | Enter the value |
| into the field | Sets the |
| name of the command that will be displayed on the SIP-panel | Latin, Cyrillic |
| and service characters |
| A line |
| containing a sequence of any |
| characters (letters, digits, service characters) | ||||||
| 5 | Code | Enter the value into the field | Sets the unique command code | Sequence of numbers or HTTP request (for http_bas) | A line containing a sequence of numbers or HTTP request |
The Device connection settings pop-up window.
Table describes the fields of the Device connection settings window.
№ | Parameter | Method for setting the parameter value | Parameter description | Representation | Default value | Value range | ||||||||||||||
| 1 | Login | numbers, service symbols)The Password fieldEnter the value | ininto the field | Sets the | passworduser name to connect to the SIP-device (BasIP) | SIP deviceLatin, Cyrillic | lettersand service characters | - | A line | representingcontaining a sequence of any | symbolscharacters (letters, | numbersdigits, service | symbolscharacters) | The IP address field|||||||
| 2 | Password | Enter the value | ininto the field | Sets the password to connect to the SIP-device (BasIP) | SIP device IP addressIP address | - | 1.0.0.0 - 255.255.255.255 | 4 | The Name field | Enter the value in the fieldSets the name of the command displayed on the SIP panel | Latin, Cyrillic | lettersand service characters | - | A line | representingcontaining a sequence of any | symbolscharacters (letters, | numbersdigits, service | symbolscharacters) | 5 | The Code field|
| 3 | IP address | Enter the value | ininto the field | Sets the | unique command codeInteger or HTTP request (for http_bas) | A line containing a natural number or HTTP requestIP address of the SIP-device (BasIP) | IP address | - | 1.0.0.0–255.255.255.255 |
Overview
Content Tools