Page History

The Auto PSIM software configuration is performed on the basis of the Axxon PSIM software platform. Necessary The necessary system objects for video subsystem performing are considered to have having already been configured and set up (see Configuring video subsystem section in the reference manual Intellect software package: Administrator's guide).

The second stage in configuring the Auto PSIM software is to create and set up system objects, necessary for processing the received video in order to identify plates, speed and type of the vehicle in the video surveillance area, and also to create databases for storing the received information.

The program module Traffic Detection is is used for identifying to identify the type of the vehicle. The Radar module is designed for identifying used to identify the speed of the vehicle.

If the ARENA module ARENA module is used and the Auto PSIM software should be  Auto PSIM is set up, create and set up the following objects:

1. LPR channel (should be only created, not set up);
2. ARENA moduleARENA module;
3. Vehicle Tracer interface object.

If the LP recognition modules recognition modules are used and the Auto PSIM software should be is set up, it is necessary to create and set up the following objects:

1. LPR channel;

   Info
   title Note.
   The LPR channel object is designed for creating used to create the multipurpose settings of the recognition modules.

   
   

2. The corresponding LP recognition module (see Activating the software module used for identifying the plates).

   Note
   title Attention!
   With the growing number of CARMENof AR-Auto identifiers on the Auto PSIM server the rate of video processing by every identifier goes down, that results in lesser percent of the identified characters. Results delay and missing of frames are also possible. The rate of video processing by CARMENby AR-Auto can also depend on the model, resolution, color and other camera's parameters.

   
   

3. Radar Speed traps server module (if LPR channel is used simultaneously with Radar module);
4. External Plates DB (if LPR channel is used simultaneously with external Plates database);
5. Vehicle Tracer interface object.

To set up the Auto PSIM software, when Vehicle Tracer is used, the following system objects should be created and set up:

...

To set up the subsystem, gathering information about vehicle streams, the following system objects should be created and set up:

1. IntelliVision IV vehicle detection;
2. Vehicle Processor.