Page History

...

1. Create the Virtual access server object on the basis of the Computer object in the Hardware tab of the System settings dialog window.
   
2. Create the FACE access point object on the basis of the Virtual access server object.
   
3. Configure the FACE access point:
   
4. Select camera which performs the face recognition. Camera must work with the face recognition server (1).
5. Select the face recognition server on the basis of which the access point is to be organized (2).
6. From the Entrance to drop-down list select the Region object corresponding to the area in which access is performed (3).
7. From the Exit from drop-down list select the Region object corresponding to the area from which the exit is performed (4).
8. From the Mode Control drop-down list select (5) select the access granting mode: automatically
   • Server decides - the server makes the decision for access granting or refusal (this includes the use of a script
   that controls the door sensors) or by approval from an operator, who has to click the button in the Event manager
   • ).
   • Operator decides - the operator makes the decision for access granting or refusal using the Event Manager module (see Working with the Event manager module)
   (5).

   In the Timeout field specify the access granting timeout in seconds (6).

   • . If this mode is selected, the following settings become available:
     Image Added
     
     • Timeout - sets the time interval in seconds to wait for access confirmation by the operator.
   Info

   title	Note

   • • All the other requests from the
   face
   • • Face recognition server will be ignored within the specified timeout.
   Configure
9. If the Server decides access granting mode was selected, then from the Mode drop-down list (6) select the access rights checking mode (7):

   • Select the Only recognition mode if it is required to take a decision about access granting only with reference  to faces recognition.

   Select the Access rights checking mode and set check boxes corresponding to checking which are to be performed if it is required to check the user access level which face was recognized, time zones of this access level and perform additional checking (8).

   • Recognition only - the server makes the access granting decision based only on face recognition.
   • Rights checking - the server makes the access granting decision after successful face recognition and successful verification of user access rights (access level, time zones, blocking, antipassback). If this mode is selected, the following settings become available:
     Image Added

     • Check date of begin and Check expiration - sets the mode of checking the access card validity:

       • Do not check – do not check the start or expiration date of the card.

       • Do not include – do not include the start or expiration date of the card in the check.

       • Include – include the start or expiration date of the card in the check.

     • Check blocking – set the checkbox to check if the user is blocked.

     • Check AntiPassBack – set the checkbox to control double pass

   • Locking checking – access will not granted in case of user is locked.

   Antipassback checking – antipassback checking through the access point.

   Info

   title	Note.

   Checking of access level and its time zones will be always performed in the Access rights checking mode

   • • .

   • Temperature monitoring - if it is required to only monitor the face temperature (see Face temperature monitoring and control).
   • Temperature control - if it is required to only control the face temperature threshold exceeding (see Face temperature monitoring and control).

   • In the Start date and Expiry date section select a radio button corresponding to the settings of checking the card validity date specified in the Access Manager interface object (9).

     • Do not check – if the card expiration date check is not required.

     • Not included – do not include the card expiration date in the check.

     • Included – include the card expiration date in the check.

   •  If this mode is selected, the following settings become available:
     Image Added
     
     • Lock user on temp. alarm - set the checkbox if it is necessary to automatically block the user when the temperature is exceeded (the User blocked - Yes parameter will be set in the Access Manager module). If the joint operation with the ACS and dynamics are enabled, then such a user will be automatically removed from the controller and therefore will be denied access.
   • Click Apply button (7) to save changesClick Apply to save changes (10).

Organizing of virtual access point while face recognition is performed.