Page History

1

The Identification number*
field

Automatically

Displays the

identification number of the RTSP Server object in the

video surveillance system with distributed architecture

Digits, letters, periods, hyphen, dash, and underscore

NA

Depends on the number of the RTSP Server objects in the

video surveillance system with distributed architecture

2

The Name*
field

Enter the value

in the field

Determines the name of the RTSP Server object in the

video surveillance system with distributed architecture

Latin alphabet, Cyrillic, digits and service characters

RTSP Server

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of

characters—from 1 to 60

3

The Disable
checkbox

Set the checkbox

Disables the RTSP Server object in the

video surveillance system with distributed architecture

Boolean type

Clear

Set—the RTSP Server object is disabled and isn't used

Clear—the RTSP Server object is enabled and used

4

The Computer
drop-down list

Select the value from the list

Sets the Computer parent object to which the given RTSP Server object belongs

Names of the Computer objects registered in the system

Name of the Computer parent object

Depends on the number of

servers in the

video surveillance system with

distributed architecture

5

The Cameras table

The Added
column

Set the checkbox

Specifies the cameras, the video signals from which

must be transmitted to the remote workstations

Boolean type

Set—the video stream can be viewed at a remote workstation

Clear—the video stream cannot be viewed at a remote workstation

The Number
column

Automatically

Displays the identification number of the Camera object in the video surveillance system with distributed architecture

Identification numbers of the Camera objects registered in the system

Depends on the number of the Camera objects registered in the system

The Name
column

Automatically

Determines the name of the Camera object in the video surveillance system with distributed architecture

Names of the Camera objects registered in the system

Depends on the number of the Camera objects registered in the system

The Gate
column

Select the value from the list

Specifies the

videogate through which video is received from the camera

Names of the Videogate objects registered in the system

NA

Depends on the number of the Videogate objects registered in the system

The Port
column

Enter the value in the field

Determines the port through which the video signal is transmitted.

Note. This column is available only if you set the Multicast checkbox.

Specified ports aren't addressed directly. Use the RTSP port to get the video data from all cameras in the Multicast mode

Sequence of numbers

NA

Any available unused port numbers.

The number of ports is determined by the system administrator

Set—the video is transmitted in the

 Unicast mode

Clear—the video isn't transmitted in the

 Unicast mode

7

The RTSP port
field

Enter the value

in the field

Determines the port

through which the video signal

is transmitted

Sequence of numbers

554

Any available unused port numbers.

The number of ports is specified by the system administrator

The HTTP port
field

Enter the value

in the field

Determines the port

that must be used for transmitting the video signal

through the

HTTP protocol

Sequence of numbers

8082

Any available unused port numbers.

The number of ports is specified by the system administrator

The Multicast
checkbox

Set the checkbox

Enables

video transmission

through different RTSP ports.

The Multicast mode allows reducing the

server load by reducing the amount of the transmitted data

Boolean type

Set—the video is transmitted in the

 Multicast mode

Clear—the video isn't transmitted in the

 Multicast mode

10

The Receiver IP address
field

Enter the value

in the field

Determines the IP address from which the video

is transmitted in the Multicast mode

IP address

224.0.1.150

From 224.0.0.0 to 239.255.255.255

Enter the value

in the field

Determines the port number

through which the video signal

is transmitted in the Multicast mode. When

you request the video data from the camera

via the RTSP protocol,

you must specify exactly this port. The system forwards the request to the port of the

required camera

Sequence of numbers

555

Any available unused port numbers.

The number of ports is specified by the system administrator

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

Set—the current time is sent to VLC Media Player

Clear—the frame time is sent to VLC Media Player

Enables the mode that is required for the correct operation of navigation through the archive

if the RTSP

server is used to broadcast video data to the ECHD system

Set—the ECHD compatibility mode is enabled

Clear—the ECHD compatibility mode is disabled

Set—if there are captions on the video image, they are sent to

the receiving app

Clear—the video captions

aren't sent through the RTSP server

Set—when you request video via RTSP, the delay

is minimum (~1 sec)

Clear—when you request video via RTSP, the delay

is ~1–5 sec

The list of the available computer network interfaces

.

ANY

—the default network interface is used