Page History

...

The settings panel of the ONVIF-Server object is shown in the figure.

The Basic settings tab.

The table describes the setting parameters of the ONVIF-Server object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	The Identification number* field	Automatically	Displays the identification number of the

ONVIF-Server

object in the video surveillance system with distributed architecture

Numbers

Digits, letters, periods, hyphen, dash, and underscore

NA

Depends on the number of the

ONVIF-Server

objects in the video surveillance system with distributed architecture
2	The Name* field	Enter the value in the field	Sets the name of the

ONVIF-Server

object in the video surveillance system with distributed architecture

Latin alphabet, Cyrillic, digits and service characters

ONVIF-Server

A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive.

Number of characters—from 1 to 60

3

The Disable
checkbox

Set the checkbox

Disables the

ONVIF-Server

object in the video surveillance system with distributed architecture

Boolean type

Clear

Set—the

ONVIF-Server

object is disabled and

not in use.

isn't used

Clear—

the

the ONVIF-Server

object

object is enabled and

in use.

used
4	The Computer drop-down list	Select the value from the list	Sets the

Computer

parent object in the system with distributed architecture to which the given ONVIF-Server

object belongs

Names of the

Computer

objects registered in the system

Name of the

Computer

parent object	Depends on the number of the computers in the video surveillance system with distributed architecture
The

6

Basic settings tab
The Connection settings group
5

PortEnter the value in the fieldSets the port number used to connect to the serverInteger numbersNAFrom 1 to 65535

The IP-interface
drop-down list

Select the value from the list

Sets the network interface (network adapter) used to connect to the server

List of available network interfaces

NA

The list of values depends on the network adapters available in the system

7

6

The RTSP-server
drop-down list

Select the value from the list

Sets the

RTSP-

server

Server object, the settings of which are applied by the

ONVIF-Server

object

while transmitting

when you transmit the video signal

Names of the

RTSP-

server

Server objects registered in the system

NA

Depends on the number of the

RTSP-

server

Server objects created in

Axxon PSIM

8Use Media2 service
Set the checkboxEnables the ONVIF 2.X standard instead of ONVIF 1.XBoolean typeClear

Set—the ONVIF 2.X standard is used. The video is transmitted in the H264, H265, MJPEG, or MPEG4 formats

Clear—the ONVIF 1.X standard is used. The video is transmitted in the MPEG, MJPEG, or H264 formats

9Allow DHCP setting
Set the checkboxEnables the DHCP supportBoolean typeClear

Set—DHCP is used

Clear—DHCP isn't used

10Discovery modeSet the checkboxEnables the WS-Discovery modeBoolean typeSet

Set—the WS-Discovery mode is enabled

Clear—the WS-Discovery mode is disabled

11Brand

7	The Port field	Enter the value in the field	Sets the port number used to connect to the server	Integer numbers	NA	From 1 to 65535
8	The Brand field

Enter the value in the field

Sets the name of the brand that is displayed in the third-party clients that support

the

video transmission via the ONVIF protocol

Latin alphabet, Cyrillic, digits and service characters

AxxonSoft

A line containing a sequence of any characters (letters, digits, and service characters)

12

9

The Model
field

Enter the value in the field

Sets the name of the model that is displayed in the third-party clients that support

the 13DepartmentSelect the value from the listSets the department in which the users are created when they are added via the ONVIF-Server interfaceNames of the Department objects registered in the systemNA

Depends on the number of the departments registered in Axxon PSIM

14Use RTSP over HTTP Proxy

video transmission via the ONVIF protocol

Latin alphabet, Cyrillic, digits and service characters

PSIM

A line containing a sequence of any characters (letters, digits, and service characters)


Out of the group
10	The Use Media2 service checkbox	Set the checkbox	Enables the ONVIF 2.X standard instead of ONVIF 1.X	Boolean type	Set	Set—the ONVIF 2.X standard is used. The video is transmitted in the H264, H265, MJPEG, or MPEG4 formats Clear—the ONVIF 1.X standard is used. The video is transmitted in the MPEG, MJPEG, or H264 formats
11	The Allow DHCP setting checkbox	Set the checkbox	Enables the DHCP support	Boolean type	Clear	Set—DHCP is used Clear—DHCP isn't used
12	The Discovery mode checkbox	Set the checkbox	Enables the WS-Discovery mode	Boolean type	Set	Set—the WS-Discovery mode is enabled Clear—the WS-Discovery mode is disabled
13	The Use RTSP over HTTP Proxy checkbox

Set the checkbox

Redirects

all RTSP-Server and ONVIF-Server requests to

requests to the RTSP server and ONVIF server on the specified port for the operation behind NAT

Boolean type

Clear

Set—the

RTSP

-Server

server and ONVIF

-Server

server requests are redirected to the specified port (item 15)

Clear—

the

the RTSP

-Server

server and ONVIF

-Server

server requests are

transmitted to the port specified in the

Connection settings

group (see item 5 above)
14	The NAT IP field	Enter the value in the field	Sets the IP address that the ONVIF server will transmit in responses to clients if clients are behind NAT	IP address	NA	Depends on the network settings behind NAT
15	The Port field	Enter the value in the field	Sets the port number for the

RTSP

-Server

server and ONVIF

-Server

server requests redirection for the operation behind NAT	Integer numbers	NA	From 1 to 65535
The Authentication group
16

NAT IP address

The Department
drop-down list

Select

Enter

the value

in

from the

field

list

Sets the

IP address that the ONVIF Server will use in responses to Clients if the Clients are behind NAT

department in which users are created when they are added via the ONVIF server interface

Names of the Department objects registered in the system

IP address

NA

Depends on

the network settings behind NAT

the number of the departments registered in Axxon PSIM

*Name of the element isn't displayed in the settings panel of the given object.

The Event settings tab.

17- event 18 in the the 19 the in the 20 the in 21 the in the 22 the in The group23 name -24

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

The

ONVIF-server event

group*

1

The ONVIF-server event
drop-down list

Select the value from the list

Sets the ONVIF

server

event according to the ONVIF specification

List of available events

NA

According to the ONVIF specification

2

The Computer
drop-down list

Select the value from the list

Sets the

Computer

object on the basis of which the object is created, that is, the event source

in Axxon PSIM

Names of

the Computer

objects registered in the system

NA

Depends on the number of

computers in the video surveillance system with distributed architecture

3

The Type
drop-down list

Select the value from the list

Sets

the event type, which is the event source

in Axxon PSIM

Names of

the object types registered in the system

NA

Depends on the number of the created objects in the video surveillance system with distributed architecture

4

The Number
drop-down list

Select the value from the list

Sets

the object number, which is the event source

in Axxon PSIM

Sequence of numbers

NA

Depends on the number of the created objects in the video surveillance system with distributed architecture

5

The Name
field

Automatically

Sets

the object name, which is the event source

in Axxon PSIM

Names of

the object of the selected type registered in the system

NA

Depends on the number of the created objects in the video surveillance system with distributed architecture

6

The Event
drop-down list

Select the value from the list

Sets

the event name

in Axxon PSIM

Event names received from the

objects of the selected type

NA

Depends on the object type

The Transfer parameters

group

7

The ONVIF-event parameter name
field

Automatically

Sets the ONVIF-event parameter

name according to the specification

Parameter names of the selected ONVIF

event

NA

According to the ONVIF specification

8

The Event parameter name
field

Enter the value in the field

Sets the event parameter name in

Axxon PSIM

Latin alphabet, Cyrillic, digits and service characters

NA

A line containing a sequence of any characters (letters, digits, and service characters)

*Name of the element isn't displayed in the settings panel of the given object.

Page tree

Versions Compared

Old Version 8

New Version Current

Key