Page History

Setting To set up the AUTO-Uragan program module is done in , do the following way:

1. Go to the settings panel of the AUTO-Uragan  module object settings panelmodule object,   which is  is created on the basis of the LPR сhannelchannel object.
   
2. In the Sensitivity of vehicle detection (1-255) field (1), enter the sensitivity value which that characterizes the motion detector sensitivity to the contrast of the video image. When recognizing, the AUTO-Uragan module also determines the vehicle dimensions. The lower the value, the higher the detector sensitivity. The value of the Sensitivity of vehicle detection parameter value is selected by testing the detector for false positives.

3. In the Car position in frame, % field (2), enter the value in percent, showing the position of a car in a the displayed frame. This setting is relevant only for those the cars which plates have not been whose license plates aren't recognized. If the plate has not been license plate isn't recognized, the module gives as a result the frame located at the specified distance from the frame with the first car appearance.

   Info
   title Note
   The moment when the a car appears in the frame is considered as 0%. The moment when the a car leaves the frame is considered as 100%.

4. Set the Full interval between cars checkbox (3) if you want the recognizer is to be in a the waiting state with motion absence in the whole frame. This adjustment setting can improve the quality of recognizing long vehicles (e.g. for example, trucks) in the frame.
5. Set the Recognize license plates only in areas where motion is detected checkbox (4) to increase the recognizing speed on mega-pixels of license plates on megapixel video cameras.

6. Enter the value of minimal validity of recognition in percent in the In the Minimum validity of LP recognition (recommended range 60-100%) field (5). Validity is defined , enter the value of minimal validity of recognition in percent. The validity of recognition is determined by the degree of similarity between results of the recognition result and the LP template and it allows distinguishing the LP from other marks on the vehicle.

   Info
   title Note
   The During license plate recognition, the validity is displayed in the List list of parameters of in the Active monitor dialog boxwindow.

7. Set the Obscured LPs checkbox (6) to increase the quality of recognizing the vehicles with obscured license plates.
8. Set the Skip unrecognized LPs checkbox (7) if it is necessary to ignore unrecognized numberslicense plates.
9. The non-editable The Number of lanes in camera field of view field  non-editable field (8) displays the , displays the number of lanes captured determined by the AUTO-Uragan module.
10. Set the Allow checkbox (9) to enable the possibility of recognizing ability to recognize the two-line LPs.
11. Set the maximum width and height of the area where the search of LPs is performed within which the license plate is searched (set in percent of the full frame) (10). Click the Image Removed button the Х button to set these parameters. In the Two-line LPs opened dialog box window that opens, click the Stop video button when the appropriate frame appears and select the area of the required size.
    
    Click After you click the OK button and , the specified area parameters will be are automatically entered in the Maximum width and Maximum height fields.
12. Set the minimum area width and height where the search of LP is performed in the Minimum width and Minimum height fields within which the license plate is searched (11) (set in percent of the full frame) by  by analogy with the the Maximum width and Maximum height parameters—see step 11.

13. In the Current version field  drop-down list (12), select the SDK version of the AUTO-Uragan module. SDK version  program module. We recommend using the 3.8 8 (default)  is recommendedversion. 

    note

    Info
    title Note
    For the proper operation of Auto PSIM on the computer with OS Windows 7 and lower, the 3.7 SDK version is required. You can also change the SDK version using the batch files (see see Changing the SDK version using batch files).
    title Attention!
    After changing After you change the SDK version, it is necessary to you must restart Auto PSIM to apply the changes.

14. Set the Parallel checkbox (13) if it is necessary you want to recognize a LP number license plate simultaneously on several processors using parallel computing, which improves the performance of the AUTO-Uragan module program module.

15. In the Number of CPUs field (14), specify the number of processors which will be that are used for the parallel computing , if the Parallel checkbox is set.

    Info
    title Note
    Processors are physical and logical cores available on the Serverserver. For example, if there are 8 cores available on the Server, server and the Number of CPUs field value is value is set to 4, then only the cores from 1 to 4 will be are involved in the LP numbers license plate recognition.

16. The typical minimum size and the typical maximum size of license plates recognized by the Auto-Uragan program module will be correspondingly are displayed in the Typical minimum size and Typical maximum size non-edited editable fields, respectively (15).

    Info
    title Note
    If no LPs were are recognized, the Typical minimum size and Typical maximum size fields won aren't be displayed. The Typical minimum size and Typical maximum size fields are displayed only if with the enabled debug mode (Debug 1-Debug 4 mode is enabled ). The debug mode is described in Axxon PSIM software package. Administrator's Guide.

17. Click the Apply button to save the changes.

    Info
    title Note
    The Current version, Parallel, and Number of CPUs parameters will be are applied to all activated AUTO-Uragan software program modules in Auto PSIM.

Setting up the AUTO-Uragan program module is completedcomplete.