Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To create a detector, do the following:

  1. Select the Settings tab DetectorsGo to the Detectors tab.
  2. Below the required camera, click Create…. The list of available categories of detectors will be displayed (see General information about detectors and their sub-detectors).
  3. Select a detector.

    A window in which you can configure a detector opens:

  4. Click the Apply button.

Creation of a detector is complete. The detector is displayed below the selected camera in the objects object tree.

Creating a sub-detector

...

Creation of a sub-detector is complete. The sub-detector is displayed below the selected camera and below the detector in the objects object tree.

Removing a detector/sub-detector

To remove a detector/sub-detector, do the following:

  1. Select the Settings tab DetectorsGo to the Detectors tab.

  2. Below the required camera, select the detector/sub-detector.
  3. Click the Remove button.

    Note
    titleAttention!

    If you created sub-detectors for the detector, they also will be removed from the existing configuration.

  4. To save the changes, click the Apply button. To cancel the changes, click the Cancel button.

Removing a detector/sub-detector is complete. The removed detector/sub-detector won’t be displayed below the camera in the objects object tree. 

Bulk creation of detectors/sub-detectors of the same type for different cameras

...

  1. Create and configure the required detectors/sub-detectors for one camera or select the existing detector/sub-detectors in the objects object tree.
  2. Click the button in the lower right corner.

    Info
    titleNote

    When you select a sub-detector, in the camera list, only those cameras that have the same parent detector will be available.

  3. Set the checkbox next to the required cameras. To quickly select a large number of cameras, press the Shift key, select the first and the last cameras for which you want to create a detector/sub-detector. The checkbox will be set for all selected cameras when you select any of them.

  4. Click the Apply button. The number of cameras for which the detector/sub-detector is created is indicated in brackets.

Bulk creation of detectors/sub-detectors of the same type for different cameras is complete. The detectors/sub-detectors of the selected cameras will be displayed in the objects object tree.

Bulk application of settings for detectors/sub-detectors of the same type

...

To bulk remove detectors/sub-detectors, do the following:

  1. Select the Settings tab DetectorsGo to the Detectors tab.
  2. Use the Ctrl key to select the detectors/sub-detectors that you want to delete in the objects object tree.

    Note
    titleAttention!

    You can select detectors of one level only. For example, if you select Motion detectiondetector, you cannot select Line crossing and vice versa.

  3. Click the Remove button.
  4. Click the Apply button to save the changes. Click the Cancel button to cancel the changes.

Bulk removal of detectors/sub-detectors is complete. The removed detectors/sub-detectors won’t be displayed in the objects object tree.