Page History
...
№ | Parameter | Method for entering the parameter value | Parameter description | Symbols used | Default value | Value range |
|---|---|---|---|---|---|---|
| 1 | Access event generation checkbox | Set checkbox | Enables/disables the Pass event generation when the face is recognized | Boolean type | No | Yes - the event generation is enabled No - the event generation is disabled |
| 2 | Mask detection event generation checkbox | Set checkbox | Enables/disables the event generation in case the mask is detected on the face | Boolean type | No | Yes - the event generation is enabled No - the event generation is disabled |
| 3 | Mask absence event generation checkbox | Set checkbox | Enables/disables the event generation in case the mask is absent on the face | Boolean type | No | Yes - the event generation is enabled No - the event generation is disabled |
| 4 | Indicate similar faces checkbox | Set checkbox | Enables/disables the grouping of similar faces | Boolean type | No | Yes - the grouping of similar faces is enabled No - the grouping of similar faces is disabled |
Temperature group | ||||||
5 | Threshold field | Enter the value into the field | Sets the temperature in degrees Celsius; when this value is exceeded, the TEMPERATURE_ALARM event is generated. | °C | 37 | <>= 0 |
6 | Combined work with thermal camera checkbox | Set checkbox | Enables/disables the FIND_PERSON event generation only when the temperature is received from the thermal camera or after the time, specified in the Thermal camera reply timeout, sec parameter | Boolean type | No | Yes - the combined work with thermal camera is enabled No - the combined work with thermal camera is disabled |
| 7 | Get photo from thermal camera checkbox | Set checkbox | Enables/disables receiving photos of captured faces from the thermal camera, and not from the video camera. | Boolean type | No | Yes - the photos of captured faces are received from the thermal imager. No - the photos of captured faces are received from the video camera. |
| 8 | Thermal camera reply timeout, sec field | Enter the value into the field | Sets the timeout in seconds for the reply from the thermal camera with the temperature | Time in seconds | 1 | >= 0 |
The Advanced settings tab.
Description of settings is given in the following table.
№ | Parameter | Method for entering the parameter value | Parameter description | Symbols used | Default value | Value range |
|---|---|---|---|---|---|---|
| 1 | Store recognized faces only checkbox | Set checkbox | Enables/disables saving information only for recognized faces | Boolean type | No | Yes - saving information only for recognized faces is enabled No - saving information only for recognized faces is disabled |