Documentation for ATM Intellect 10.0. Documentation for other versions of Intellect is [available too].

Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

You can view live and previously recorded video from objects from the Control Panel. To do so, right-click the area with the object name. In the context menu that appears, select Video image playback and the relevant camera.

The number of cameras will match the number of cameras enabled in the settings for the object.

 

Note.

The Video image playback menu item is available only for objects that have connected to ATM Intellect Workstation at least once. This menu item is absent for objects that have not connected at least once and for ATM Intellect Workstation TC.

 

If the ATM-Intellect Workstation software have the corresponding setting, then when the camera is selected for viewing live video the warning will be displayed saying that transmission of video can create critical load on the channel. If it is really necessary to view live video, click OK in the Warning dialog box. To cancel viewing live video, click Cancel.

After you select a camera, a dialog box appears; video should appear in it after a few seconds.

The title bar displays a description of the object, camera number, and camera ID in brackets.

Note.

When viewing live video, frame rate may be limited by the ATM Monitoring interface object settings (the Speed of video stream parameter) - see documents ATM Intellect. Administrator's Guide.

Archive access is available through the method used in Intellect.

While viewing live video or archive from several cameras simultaneously, a separate dialog box opens for each camera.

  • No labels
Error formatting macro: children: java.lang.NullPointerException