Go to documentation repository
Documentation for Intellect 4.10.4. Documentation for other versions of Intellect is available too.
Previous page Next page
The PTZ section is used for setting the telemetry control elements.
The settings panel for the PTZ section is shown in the figure.
The parameters of the PTZ settings panel are described in the table.
No | Parameter name | Field type | Description | Representation | Default value | Value range |
1 | The Delay between commands (ms) field | Type-in the value | Sets the delay time between executing the commands for PTZ devices This parameter is not supported by IP cameras. | ms | 250 | No limitations. It is not recommended to change the default value. |
2 | The Delay by priority (ms) field | Type-in the value | Sets the delay time before switch from the PTZ control to a user with lower or equal priority. | ms | 30000 | No limitations. It is not recommended to change the default value. |
The Speed limit group | ||||||
3 | The Minimum speed (1-10) field | Type-in the value | Sets the minimum rotation speed of PTZ devices. | Speed in standard units | 1 | 1-10 |
4 | The Maximum speed (1-10) field | Type-in the value | Sets the maximum rotation speed of PTZ devices. | Speed in standard units | 10 | 1-10 |
Overview
Content Tools