Capturing fingerprints in Access Manager with Suprema readers

Capturing fingerprints in Access Manager with Suprema readers is carried out as follows:

1. Open the Access Manager window (see Starting and stopping the Access Manager module).
2. Go to user editing (see Going to user editing).
3. Right-click the user's photo in the Access Manager window and select Extensions.
   
4. Select Suprema Host Controller or Suprema Slave Controller to use the reader connected to the corresponding controller (for information on configuring the readers see Configure the interaction between the Suprema Biometrical ACS and the Access Manager module).
   In both cases, the Suprema dialog will open.
   

5. The existing fingerprints are displayed in the (1) list. The first two fingerprints highlighted in bold will be written to the Suprema controller. To delete a fingerprint, select it in the list and click Remove (2). To delete all user fingerprints, click Remove all (3).

6. Click Add (4) to start capture. The capture dialog will open.

   

7. Configure the capture parameters:

   1. Select the minimum quality of the fingerprint image in the Quality dropdown list (1). The system will attempt to capture the fingeprint until the resulting image has the given quality. 
   2. Select minimum similarity level of the fingerprints in the Security Level dropdown list (2). The system will attempt to scan the second fingerprint until the resulting image matches the first one to a given level.

8. Click Start Capturing (3).

   Note

   The capture can be interrupted at any moment by the Abort Capturing button.

9. Put finger on reader and wait until two copies of a fingerprint are captured. The fingerprint image is displayed in the corresponding area as soon as it is captured (1).
   
10. To finish capture, click OK (2).
11. Click Save (1) in the user editor to add the fingerprint to the user account. 
    .

Capturing fingerprints in Access Manager with Suprema readers is complete.