Go to documentation repository
Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.
Previous page Next page
The settings panel of the rtsp Server object is shown in figure.
Table describes the parameters of the settings corresponding to the elements of the settings panel of the rtsp Server object.
№ | Parameter | Method for setting the parameter value | Parameter description | Symbols used | Default value | Value range |
1 | ID* | Automatically | Displays the ID of the rtsp Server object in the video surveillance system | Sequence of numbers | - | Depends on the number of the rtsp Server objects in the video surveillance system |
2 | Name* | Type-in the value in the field | Sets the name of the rtsp Server object in the video surveillance system | Latin, Cyrillic and service characters | rtsp Server | A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
|
3 | Disable | Checkbox | Sets the state (enabled or disabled) of the rtsp Server object in the video surveillance system | Boolean type | No | Yes – the rtsp Server object is disabled and is not in use. No - the rtsp Server object is enabled and is in use. |
4 | Computer | Selected in the list | Sets the parent Computer object to which the rtsp Server object relates | Names of the Computer objects registered in the system | Name of the parent Computer object | Depends on the number of Servers in the video surveillance system with distributed architecture |
5 | Cameras | Checkbox | Specifies cameras video from which is to be transmitted to remote workstations | Boolean type | No | Yes – video stream can be viewed at remote workstation. No – video stream cannot be viewed at remote workstation |
| 6 | Port | Type-in the value in the field | Sets a port via which a video signal from the camera is transmitted. Note. This column is available only if is the Multicast check box is set checked (10). | Sequence of numbers | - | Any numbers of ports that are not in use. The number of ports is specified by the system administrator. |
| 7 | Gate | Select the value in the list | Specifies the Video gate through which video is received from the camera | The names of the Video gate objects registered in the system | - | Depends on the number of the Video gate objects registered in the system |
8 | RTSP port | Type-in the value in the field | Sets the port via which video is transmitted | Sequence of numbers | 554 | Any numbers of ports that are not in use. The number of ports is specified by the system administrator. |
9 | HTTP port | Type-in the value in the field | Sets the port which is to be in use for transmitting video via http-protocol | Sequence of numbers | 8081 | Any numbers of ports that are not in use. The number of ports is specified by the system administrator. |
10 | Multicast | Checkbox | Enables video transmission via different RTSP ports. The Multicast mode allows reducing Server load due to transmitted data reduction. | Boolean type | No | Yes – video is transmitted via several RTSP ports. No – video is transmitted via one RTSP port. |
11 | Receiver IP address | Type-in the value in the field | Set the address from which the broadcast in Multicast mode will be performed | IP address | 224.0.1.150 | From 224.0.0.0 to 239.255.255.255 |
*The name of the element is not displayed in the settings panel of the given object.
Overview
Content Tools