Configuring the Neurotracker module

The Neurotracker software module is configured on the Neurotracker object settings panel. This object is created under the Camera object on the Hardware tab of the System settings window.

The Neurotracker software module is configured as follows:

1. Go to the Neurotracker object settings panel.
   
2. Set the Generate the event when the track is appeared/disappeared checkbox (1) if it is necessary to generate the event when the track appeared/disappeared.
3. Set the Show objects on image checkbox (2) if it is necessary to highlight the detected object with a frame in the Monitor interface object window.

4. Click the  button (3), and in the standard Windows window that opens, select the neural network file with the tracking model.

5. In the Sensitivity, % field (4), specify the neurotracker sensitivity — an integer value within the range from 0 to 100.

   Note

   The neurotracker sensitivity is determined experimentally. The lower the sensitivity, the more false triggerings there might be. The higher the sensitivity, the less false triggerings there might be, however, some useful tracks might be skipped.

6. In the Frame rate limit field (5), specify the number of frames per second to be analyzed by the neural network. All other frames will be interpolated. The higher the specified value, the more accurate the tracking, but the higher the CPU load.

7. In the Device drop-down list (6) select the device where the neurotracker will operate.

8. Click the Apply button (11).

   Note

   • If necessary, create and configure the NeuroTracker VMDA detection tools on the basis of the Neurotracker object. The procedure of creating and configuring the NeuroTracker VMDA detection tools is similar to creating and configuring the VMDA detection tools for a regular tracker. The only difference is that it is necessary to create the NeuroTracker VMDA detection tools on the basis of the Neurotracker object, and not the Tracker object (for details, see Creating and configuring VMDA detection).
     
   • If it is necessary to periodically generate the events containing the number of objects received from the neurotracker, then create and configure the neurotracker track counters (see Configuring the neurotracker track counter).

The Neurotracker software module configuration is complete.