Go to documentation repository
Recognition settings of Hikvision reader are available for access control terminals that contain both a face scanner and a built-in fingerprint reader.
Note
Recognition settings of Hikvision reader will be illustrated by an example of the Hikvision K1T605XF access control terminal. Network settings for other Hikvision terminals are similar.
To configure the Hikvision reader recognition settings, do the following:
- Go to the Hikvision K1T605XF Reader object setup panel.
- Go to the Recognition tab (1).
- From the Recognition level drop-down list (2), select the recognition level:
- 1/1000(FAR).
- 1/100000(FAR).
- 1/1000000(FAR).
- 3/100000(FAR).
3/1000000(FAR).
Note
The higher the recognition level, the lower the probability of false identification.
- Set the Human detection enabled checkbox (3) to enable the detection of live faces.
- From the Recognition Interval drop-down list (4), select the time interval in seconds between the previous and next face recognition during the continuous operation: from 1s to 10s.
- From the 1:1 Match Security Level drop-down list (5), select the verification quality level if only one type of authentication is used: Normal, High, or Higher.
- From the 1:N Match Security Level drop-down list (6), select the authentication quality level if several authentication types are used: Normal, High, or Higher.
- Click the Apply button (7).
The Hikvision reader recognition settings are now configured.
Overview
Content Tools