Documentation for Auto Intellect 5.0. Documentation for other versions of Intellect is [available too].

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Half-frame processing is to be performed using the image interlaced scanning («Reduce large resolution» check box is set). Receiving the next frame the new one consisting of even rows of the initial frame is processed if the «Reduce large resolution» check box is set. By default, the LPR channel processes the frame.
The frame processing is not to be performed and the «Reduce large resolution» is to be unchecked when full resolution is used.
By default, when the Reduce large resolution checkbox is checked, the LPR channel processes the frames in the following way:

  1. If the frame resolution is smaller than the LPR channel requires, it is up-scaled to the required size.
  2. If the frame resolution is larger than the LPR channel requires, it is down-scaled to the required size.

Note. While using full resolution, the Reduce large resolution checkbox should be necessary checked, otherwise unwanted «rake» effect may be observed.
If the Reduce large resolution checkbox is unchecked, the frames are processed in the following way:

  1. If the frame resolution is smaller than the LPR channel requires, it is up-scaled to the required size.
  2. If the frame resolution is larger than the LPR channel requires, it is processed as it is (with no down-scaling).

Note. Frame processing setup is given only when Auto-Uragan 3.5.0.29, CARMEN-Parking, CARMEN-Auto, ACCR or VIT program module is used.
To set the frame processing, do the following:

  1. In the System Settings dialog window, open the Hardware tab (Fig. 7.2—29, 1).
  2. In the object tree of the Hardware tab, select the LPR channel, corresponding to the activated Auto-Uragan 3.5.0.29, CARMEN-parking, CARMEN-Auto, ACCR or VIT program module (see. «Program module activation, used for Plates identification», Fig. 7.2—29, 2).The settings panel of the selected object will open on the right side of the window.


Fig. 7.2—29 Frame processing setup

  1. Check or uncheck the «Reduce large resolution» checkbox (Fig. 7.2—29, 3).
  2. Click «Apply» (Fig. 7.2—29, 4).

The frame processing setup is now complete.
Note. We recommend to always check the Reduce large resolution checkbox in order to decrease the CPU load.

  • No labels