The Vehicle processor settings panel

The Vehicle's processor object settings panel includes the following interface elements (Table 8.6—1, Fig. 8.5—1).
Fig. 8.6—1 The Vehicle processor system object setup
Table 8.6—1 Vehicle processor object description

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	ID numbder	Automatically	Displays Vehicle's processor object's ID in the system	Numbers	-	From 1 and above. Depends on the Vehicle's processor objects number in the system
2	Name	Enter the value in the field	Set the object's name «Vehicle's processor» in the system	Latin, Cyrillic and special symbols	Vehicle's processor	A sting, containing a sequence of characters (letters, digits, characters)non case-sensitive Number of characters if from 1 to 60.
3	Disable	Is set by a checkbox	Set the Vehicle's processor object state(enabled or disabled)in the system	Boolean type	No	Yes– «Vehicle's processor» object is disabled and is not in use No –Vehicle's processor object is enabled and in use
4	Computer	Select the value from the list	Se the Computer parent object in the system, to which Vehicle processor object is related	Names of objects, registered in the system «Computer»	Name of the parent object«Computer»	Depends on the objects number«Computer» in the system
5	Virtual loop	Is set by a checkbox	Enables the mode that is resulted in retranslation of messages about vehicle's passing in or out of the detection zone.	Boolean type	No	Yes– Virtual loop imitation mode is enabled No – Virtual loop imitation mode is disabled
6	Data acuisition	Is set by a checkbox	Enables the mode that is resulted in traffic data acquisition and storing them to the database	Boolean type	No	Yes– traffic data acquisition mode is enabled No – traffic data acquisition mode is disabled
7	Incidents register	Is set by a checkbox	Enables the mode that is resulted in accidents fixation in the traffic stream	Boolean type	No	Yes– accidents fixation mode is enabled No – accidents fixation mode is disabled
8	Vehicle detector	Select the value from the list	Set the module Vehicle detector which data have to be processed	Names of objects, registered in the system Vehicle detector	-	Depends on the Vehicle detector objects number, registered in the system
9	Free stream speed, km/h	Enter the value in the field	Set the Free stream speed constant which is to be entered in the database in case when for the data acquisition time no vehicle has been registered	Number Speed in km/h	-	From 0 to 200
10	Length of turn	Is set by a checkbox	Enables the mode, which results in determining the Length of turn	Boolean type	No	Yes– determining the Length of turn mode is enabled No – determining the Length of turn mode is disabled
11	Enter	Select the value from the list	Set the region object corresponding to the area, located at the entrance area to the detection zone	Names of Region objects, registered in the system	-	Depends on the Region objects number, registered in the system
12	Exit	Select the value from the list	Set the region object corresponding to the area, located at the exit area from the detection zone	Names of Region objects, registered in the system	-	Depends on the Region objects number, registered in the system
13	Data acquisition time	Enter the value in the field	Set the Data acquisition time, coming from vehicle detector module. Upon the end of this time validity the data are stored in the database	Number Time in seconds	-	From 300 to 3600
14	Classification settings	Press the button	Access to Classification settings of detected vehicles	-	-	-

Page tree

Documentation for Auto Intellect 5.0. Documentation for other versions of Intellect is [available too].