Configuring the ATM Monitoring object

To configure the ATM Monitoring object proceed as follows:

1. Go to the ATM Monitoring  settings panel.
2. If the Control panel displaying is needed, set the Control panel checkbox and specify its coordinates on the screen (1).
   
3. If the Log panel displaying is needed, set the Log panel checkbox and specify its coordinates on the screen (2).
4. The setting Non-empty comment field is used if the operator is required to comment on the alarm and/or their actions when the alarm is accepted (3). This comment is available for viewing in the event log as well as the name of the operator who accepted the alarm.

5. If when live video is attempted to be viewed from Control Panel it is necessary to display a warning that it can create the critical load per channel, set the Warning when watching live video checkbox (4).

   Note.

   This setting is not available for ATM-Intellect Workstation TC installation type.

6. In the Speed of video stream field specify the frame rate for live video displaying in frames per second (5). This parameter is used to limit the flow of data between the ATM Intellect Workstation and the ATM Intellect Pro (for example, in the case of low-bandwidth communication channel) while viewing live video from the objects through the ATM Monitoring window (see document ATM Intellect. Operator's guide)

   Note.

   This setting is not available for ATM-Intellect Workstation TC installation type.
7. Select groups of alarms for the Control panel and the Log panel to be displayed (6).

Configuring the ATM Monitoring object is completed.

If display is selected under which the ATM Monitoring object is created, the ATM Monitoring window will be displayed.