Configuring device channels

The device state is described by specific number of variables - channels. The channel can have both digit and string values.

A channel is configured on the settings panel of the SNMP Wrapper channel created under SNMP Wrapper.

Configure a channel as follows:

1. Enter the channel ID (1). 
   The value of channel ID is to be specified without the value of device ID (see Connecting device via SNMP). 
   For instance, the full channel ID is 1.3.6.1.4.1.318.1.1.12.1.6.0 where device ID is in bold. 
2. If required select a rule the channel is to comply with (2, see ). 
3. Set the Value chaged (3) checkbox checked if events about changed channel value are not to be displayed in the Event log. 

4. If the channel value is to be presented as text on the map set the Analog params (4) checkbox unchecked.

   Attention!

   Changed values of this parameter are applied after Intellect Server restart.

5. Set the Custom events (5) checkbox checked if events are not to be displayed in the Event log when the rule triggers. 
6. Click the Apply button.

Device channel configuration is now completed.