Documentation for Auto Intellect 5.5. Documentation for other versions of Intellect is available too.

Previous page Next page


The LPR channel can operate together with the main motion detector of the Intellect platform. This helps decrease the CPU load.

Note.

This setting is given only when Auto-Uragan, CARMEN-Auto, ARH-Containers, VIT, or IntelliVision LPR program module is used.

If the LPR channel works in conjunction with the Intellect main motion detector, it scans the video image for LP numbers when the motion detector is in an alarmed state, i.e. some motion is detected in the camera viewing zone.

Note.

When the main motion detector is not alarmed, the LPR channel does not scan the video image to find and recognize the LP numbers.

If the joint operation is disabled, the LRP channel scans each incoming frame.

To enable joint operation of the LPR channel and the Intellect motion detector, do the following:

  1. Go to the LPR channel object settings panel, corresponding to the activated module (see Activating the program module, used for identifying the plates section).

  2. Check the Enable on motion detection trigger checkbox (1).
  3. Click Apply (2).

The joint operation of the LPR channel and Intellect is now completed.

  • No labels