Documentation for Auto Intellect 5.5. Documentation for other versions of Intellect is available too.

Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The LPR channel can operate together with the main motion detector of the Intellect platform. This helps decrease the CPU load.

Note.

This setting is given only when Auto-Uragan, CARMEN-Auto, ARH-Containers or IntLab-Carriages program module is used.

If the LPR channel works in conjunction with the Intellect main motion detector, it scans the video image for LP numbers when the motion detector is in an alarmed state, i.e. some motion is detected in the camera viewing zone.

Note.

When the main motion detector is not alarmed, the LPR channel does not scan the video image to find and recognize the LP numbers.

If the joint operation is disabled, the LRP channel scans each incoming frame.

To enable joint operation of the LPR channel and the Intellect motion detector, do the following:

  1. In the System Settings dialog window, open the Hardware tab (1).
  2. In the object tree on the left side of the Hardware tab, select the LPR channel (2).The settings panel of the selected object will open on the right side of the window.
  3. Check the Enable on motion detection trigger checkbox (2).
  4. Click Apply (4).

The joint operation of the LPR channel and Intellect is now completed.

  • No labels