Configuration of Rosslare exits

Configuration of АС-215 controller exits is performed on the setting panel of the  Rosslare exit object. This object is created on the basis of the AC-215 controller object on the Hardware tab of the System settings dialog box.

To configure АС-215 controller exits do the following:

1. Go to the setting panel of the Rosslare exit.
   
2. From the Number dropdown list select the number of exit (1).
3. In the Open by timer field using up-down keys set the time (in minutes and seconds) during which the door is open (2).
4. To save changes click Apply (3).

Configuration of exits is completed.