Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Next page


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The network settings of the Intellect's SIP-client are similar to the network settings of the SIP-server, however, it is necessary to additionally specify the parameters of the SIP server connection (either the Intellect installed on another computer, or the Asterisk software).

The network settings of the Intellect SIP-client are set in the following order:

  1. Go to the settings panel of the SIP-terminal object.
  2. Set the Terminal type switch to the SIP client position (1) — the SIP-terminal acts as a client, it can be connected to any SIP-server (based on the Intellect or Asterisk software). If this terminal type is selected, the Server connection settings become editable.
  3. In the Address field in the Server connection settings group (1), specify the IP address of the SIP server.
  4. In the Port field in the Server connection settings group (2), specify the port for the SIP server connection.
  5. In the Terminal settings group, specify the SIP client settings in the same way as for the SIP server (see Network settings of the Intellect's SIP-server).
  6. Click Apply (3).

The network settings of the Intellect SIP-client are set.

  • No labels
Error formatting macro: children: java.lang.NullPointerException