VideoIntellect abandoned objects detection

The VideoIntellect abandoned objects detection is configured as follows:

1. On the Select area tab, do the following:
   
   1. Set one or more zones in which the abandoned objects will be detected (1).
   2. To capture a frame of a video image, click the Stop video button (2).
   3. All set zones are displayed in the Detection zones area (3). If necessary, you can change the name of the zone or delete the zone.
   4. Click the Apply configuration changes button (4).
2. On the Abandoned objects detection tab, configure the detection tool parameters:
   
   1. In the Initial detection sensitivity (0-1) field (1), enter the general sensitivity of the detector.
   2. In the Object visibility (0-1) field (2), enter the detection sensitivity of subtle (merging with the background) objects.
   3. In The passenger traffic density (0-1) field (3), enter the object detection sensitivity in conditions of intensive object overlap by passing people.
   4. In the Minimum size of detected object (cm) field (4) enter the minimum object size on one side in centimeters to be detected. Smaller objects will not trigger the detection.
   5. In the Maximum size of detected object (cm) field (5), enter the maximum object size on one side in centimeters to be detected. Larger objects will not trigger the detection.
   6. In the Detection time (s) field (6) enter the time in seconds after which the object is considered abandoned.
   7. Set the Without person checkbox (7) to ignore the objects left next to the person.
   8. Set the Filter objects checkbox (8) to enable the object neural network filter.
3. On the Parameters tab, the area (1) displays the current detection configuration. This configuration can be copied to any text file. To upload a configuration from a file, click the Load configuration from file button (2).
   
   Description of configuration parameters:
   1. sensitivity - Initial detection sensitivity.
   2. rejectlvl - Object visibility.
   3. acceptlvl - The passenger traffic density.
   4. objsizemin -Minimum size of detected object.
   5. objsizemax - Maximum size of detected object.
   6. detectiontime - Detection time.
   7. isFilterHumans - Without person.
   8. isFilterObjects - Filter objects.
4. Click the OK button to complete the detection configuration.

The VideoIntellect abandoned objects detection is now configured.