Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Features of Stream Labs IP device configuration  Features of Mobotix IP device configuration Next page


Cisco 4500 IP-device supports the following formats of video signal compression:

  1. H.264;
  2. MJPEG.

While setting the resolution the H.264 format has a higher priority than MJPEG: a possibility to set the resolution for MJPEG exceeding the given for H.264, is not provided.

Priority difference leads to the following effects:

  1. After changing the video capture card of the Cisco(h264) type for Cisco(mjpeg) with standard video resolution,MJPEG video resolution can not be increased;
  2. When the video capture cad of the Cisco(mjpeg) type is changed for Cisco(h264) with full video resolution, the resolution will be changed from 704*576 to 1280*720. Resolution 720*576 will be set after return to the Cisco(mjpeg) type.

Note

The type of a video capture card is selected in the Type dropdown list on the settings panel of the Video Capture Device object. Video resolution is set with the use of the same parameter on the settings panel of the Camera child object.