Configuring the combobox

Configure the combobox as follows:

1. On the Logic tab, select the element in the table and click the Edit button.
   
2. If necessary, in the Step description field (1), enter the text that will be displayed in the column to the left next to the element.
   

3. From the Number of elements list (2), select the required number of drop-down lists.

   Note

   The maximum number of elements is determined by the possible number of columns when you display the logic (see Configuring the display of logic).

4. In the Content fields (3), click the button and enter the values ​​for the lists. Enter each value on the new line.
   
   To save the values and close this window, click .
5. From the Number of conditions list (4), select the number of different logics used to proceed the event handling. In this case, each logic implies a set of values ​​that the operator selected from the lists. For each such set of values, you can set the next element to display.
6. If you want to display the same element at any selected values, set up this element in the Logic group (5). If you use several logics, set up each logic settings in the Logic [N] group (6), where N is the logic number. To set it up, do the following:
   1. In the Conditional transition field, select the element that must be displayed next.
   2. If you also want to execute a macro, select it from the Macro list.
   3. Select values ​​from the lists at which the above actions will be performed.
7. Click the OK button.

Example of displaying the Combobox element:

Configuring the Combobox element is complete.