Documentation for ACFA PSIM 1.3.

Previous page Configuring the Unicard ACP  Working with the Unicard integration module Next page

Configuring the Unicard reader is performed on the settings panel of the Unicard Reader object created on the basis of the Unicard ACP object on the Hardware tab of the System settings dialog window.

To configure the Unicard reader, do the following:

  1. Go to the settings panel of the Unicard Reader object.

  2. Check the Request operator box if the data supplied to the reader must be confirmed by the operator.

    Note

    In order for this functionality to work properly, enable the global antipassback first by checking the GLOB_APB_ENABLE box in the settings of the Unicard controller (see Configuring the Unicard controller).

  3. Click the Apply button to save changes.

Configuring the Unicard reader is completed.

  • No labels