Configure the connection of the Siemens Cerberus ECO system to ACFA PSIM

Siemens Cerberus ECO system is connected to ACFA PSIM as follows:

1. Create the Cerberus ECO controller object based on the Computer object on the Hardware tab of the System settings dialog window.
   
2. Specify the following parameters on the settings panel of the Cerberus ECO controller object:
   1. Enter the Siemens Cerberus ECO controller address in the ID field (1).
      Default address – 1. The same address is to be specified in the configuration file (see Configuring of Siemens Cerberus ECO system in the vendor software).
      
   2. Specify the COM-port of Siemens Cerberus ECO device connection in the corresponding field (2).
3. Click the Apply button (3).
4. Click the Read configuration button (4).

As a result the system configuration will be read and objects tree will be built in ACFA PSIM.