Documentation for Monitoring PSIM 1.0 (english)

Previous page Next page

By default, the Central Server of Control software works via FTP in a passive mode, and this requires adding the range of ports to which the Central Server of Control software will connect in the FTP server settings. It is possible to switch to the active mode. To do this, it is necessary to set the 0 value for the PassiveModeForFTP registry key (for details, see Registry keys reference guide).

The FTP server for the Central Server of Control operation should be configured on the side of each Server of Control as follows:

  1. Create a user with administrator rights in the system.

    Note

    The password validity period for this user should not be limited in time.

  2. If IIS is not installed, install it:
    1. Open the Control Panel → Programs and Features → Turn Windows Features on or off.
    2. In the IIS Services section, select the checkboxes next to the FTP Service and IIS Management Console components.

    3. Click OK.

  3. Open Computer Management and in the Services and Applications section (1), select IIS Manager (2).

    1. In the Connections area, select the Sites folder (3), and then in the Actions area, click the Add FTP Site... link (4). As a result, the Add FTP Site window appears.

    2. In the FTP site name field (5), enter the name of the FTP site.

    3. In the Physical path field (6), or using the  button, specify the path to the FTP directory. By default, the FTP directory is located at <Axxon PSIM installation directory>\Vhost\DATA\FTP\. You can change this directory using the FtpPath registry key (for details, see Registry keys reference guide).

      Note

      To increase the performance of data exchange, it is recommended that the export directory (see Specifying the export directory) and the FTP directory are located on the same disk.

    4. Click Next.
    5. Configure the binding and SSL settings as shown in the figure below.
    6. Click Next.
    7. Configure the authentication and authorization as shown in the figure below. It is necessary to specify the user created in step 1 as the authorized user.
    8. Click Finish.

Configuring the FTP server for the Central Server of Control software operation is complete.

  • No labels