The settings panel of the Access Manager object

The settings panel of the Access Manager interface object is shown in the figures.

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
The Position group
1	Fix position	Set the checkbox	Set the checkbox if you want to specify the coordinates and the size of the Access Manager window on the screen and prohibit its movement	Boolean type	Clear	Set—position of the Access Manager window is fixed Clear—position of the Access Manager window can be changed
2	Monitor	Select the value from the drop-down list	Sets the number of the monitor on which the Access Manager window will be displayed	List of available computer monitors	Monitor 1	Depends on the number of the connected computer monitors
3	X	Enter the value in the field	Sets the coordinate of the upper left corner of the Access Manager window along the horizontal X axis	% of screen width	0	From 0 to M*100, where M is a number of installed computer monitors
	Y	Enter the value in the field	Sets the coordinate of the upper left corner of the Access Manager window along the vertical Y axis	% of screen height	0	From 0 to M*100, where M is a number of installed computer monitors
	W	Enter the value in the field	Sets the width of the Access Manager window	% of screen width	0	From 0 to M*100, where M is a number of installed computer monitors
	H	Enter the value in the field	Sets the height of the Access Manager window	% of screen height	0	From 0 to M*100, where M is a number of installed computer monitors
Outside the groups
4	Create new users with antipassback	Set the checkbox	Sets the default value for the user antipassback parameter	Boolean type	Clear	Set—by default, the users are created with enabled antipassback Clear—by default, the users are created with disabled antipassback
5	New root departments visible	Set the checkbox	Sets the availability of the created departments in the Access Manager that are located in the root of the hierarchy	Boolean type	Set	Set—new departments created in the root of the hierarchy are available in the Access Manager Clear—new departments created in the root of the hierarchy aren't available in the Access Manager

The Departments tab

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
1	Departments tree	Set the checkbox	Sets the departments available in the Access Manager window	Boolean type	Set of boolean variables	Department will be available in the Access Manager window if you set the checkbox next to it

The AL tab

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
1	Mode	Select the value from the list	Sets the access restriction mode to the access levels in the Access Manager interface object	-	Prohibition	Prohibition—restrict the access to the selected access levels Permission—allow the access to the selected access levels
2	Access levels tree	Set the checkbox	Specifies the access levels, the access to which must be configured	Boolean type	Set of boolean variables	If the checkbox is set for the access level, the selected access restriction mode will be applied to it in the Access Manager interface object
3	The action button	Select the value from the list	Opens a list of actions for managing the access levels tree	-	-	Minimize—minimizes all access levels in the tree Expand—expands all access levels in the tree Select all—sets the checkboxes for all access levels Remove all—clears checkboxes for all access levels Search—opens the Access level search or folder search window for access level or folder searching by the name or identifier

The TZ tab

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
1	Mode	Select the value from the list	Sets the access restriction mode to the time zones in the Access Manager interface object	-	Prohibition	Prohibition—restrict the access to the selected time zones Permission—allow the access to the selected time zones
2	Time zones tree	Set the checkbox	Specifies the time zones, the access to which must be configured	Boolean type	Set of boolean variables	If the checkbox is set for the time zone, the selected access restriction mode will be applied to it in the Access Manager interface object
3	The action button	Select the value from the list	Opens a list of actions for managing the time zones tree	-	-	Minimize—minimizes all time zones in the tree Expand—expands all time zones in the tree Select all—sets the checkboxes for all time zones Remove all—clears the checkboxes for all time zones Search—opens the Time zone search or folder search window for time zone or folder searching by the name or identifier

The Right tab

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
The Create / Delete / Edit group
1	Create	Set the checkbox	Sets possibility to create the corresponding object in the Access Manager window	Boolean type	Set	Set—creating the corresponding object from the Access Manager window is allowed Clear—creating the corresponding object from the Access Manager window is forbidden
	Delete	Set the checkbox	Sets possibility to delete the corresponding object in the Access Manager window	Boolean type	Set	Set—deleting the corresponding object from the Access Manager window is allowed Clear—deleting the corresponding object from the Access Manager window is forbidden
	Edit	Set the checkbox	Sets possibility to edit the corresponding object in the Access Manager window	Boolean type	Set	Set—editing the corresponding object from the Access Manager window is allowed Clear—editing the corresponding object from the Access Manager window is forbidden
2	Check all	Click the button	Sets all checkboxes in the Create / Delete / Edit group	-	-	-
3	Uncheck all	Click the button	Clears all checkboxes in the Create / Delete / Edit group	-	-	-
The Forbid to delete group
4	Non-empty departments	Set the checkbox	Forbids to delete departments if there are users in them	Boolean type	Clear	Set—non-empty departments cannot be deleted Clear—non-empty departments can be deleted
	Assigned AL	Set the checkbox	Forbids to delete access levels if they are assigned to a user or department	Boolean type	Clear	Set—assigned access levels cannot be deleted Clear—assigned access levels can be deleted
	Assigned TZ	Set the checkbox	Forbids to delete time zones if they are assigned to an access levels	Boolean type	Clear	Set—assigned time zones cannot be deleted Clear—assigned time zones can be deleted
The Allow to change group
5	User type	Set the checkbox	Enables the possibility to change the user type	Boolean type	Clear	Set—the user type change is allowed Clear—the user type change is not allowed
	User department	Set the checkbox	Enables the possibility to change the user department	Boolean type	Clear	Set—the user department change is allowed Clear—the user department change is not allowed
	Current region	Set the checkbox	Enables the possibility to change the current region	Boolean type	Clear	Set—the current region change is allowed Clear—the current region change is not allowed

The Cards tab

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
The Limit cards count group
1	Minimum	Select the value from the list	Sets the minimum number of access cards that must be assigned to the user	List of values of the minimum number of access cards of a user	Unlimited	from 1 to 10—if the specified number of access cards is not assigned to the user, then this user cannot be saved in the Access Manager interface object Unlimited—an unlimited number of access cards can be assigned to the user Prohibited—the user cannot be assigned access cards. Buttons and function menu for assigning access cards will be inactive in the Access Manager interface object
2	Maximum	Select the value from the list	Sets the maximum number of access cards that must be assigned to the user	List of values of the maximum number of access cards of a user	Unlimited	from 1 to 10—if the user is assigned more than the specified number of access cards, then this user cannot be saved in the Access Manager interface object Unlimited—an unlimited number of access cards can be assigned to the user Prohibited—the user cannot be assigned access cards. Buttons and function menu for assigning access cards will be inactive in the Access Manager interface object
The Formatting group
3	Common format	Select the value from the list	Sets the format of access cards	List of values of access cards fprmats	Default	Default—allows setting an arbitrary value for the facility code and card code. Any letters, numbers and symbols are allowed Wiegand26—allows entering a 1-byte facility code (from 0 to 255), and a 2-byte card code (from 0 to 65535). If the limit of the code length is exceeded, the user cannot be saved Wiegand32—allows entering a 2-byte facility code (from 0 to 65535), and a 2-byte card code (from 0 to 65535). If the limit of the code length is exceeded, the user cannot be saved Wiegand26 (code only)—the facility code cannot be set, only a 3-byte card code is set (from 0 to 16777215) Wiegand32 (code only)—the facility code cannot be set, only a 4-byte card code is set (from 0 to 4294967295) TouchMemory—the facility code cannot be set, only the 8-byte card code is set. The format is hexadecimal, characters A, B, C, D, E, F are allowed. The code must be eight characters or longer. If the entered card code is less than eight characters long, the the higher order digits are filled with zeros Hikvision—the Hikvision ACS format. It always has a fixed H character in the facility code. The card code is specified by a string with a maximum length of 32 characters Configurable—allows setting the parameters of the facility code (4) and card code (5) Fixed character—the specified single character will always be hard-coded, which cannot be changed in the Access Manager interface object String—allows entering a string of 0 to 255 characters Numeric—allows entering only numbers from 0 to 4294967295. Hexadecimal—allows entering numbers in HEX format (numbers and characters A, B, C, D, E, F) from 0 to 8 bytes long. Fixed number—similar to Fixed character, but instead of a character, a number between 0 and 4294967295 is used Regular template—allows defining an access card template with specified restrictions, lengths and value ranges

The Readers tab

№

Parameter name

Method of setting the parameter value

Parameter description

Representation

Default value

Value range

1

Confirm card entered by operator

Set the checkbox

Sets the requirement to confirm the card code entered by operator

Boolean type

Clear

Set—operator confirmation is required to assign access card to a user

Clear—operator confirmation is not required to assign access card to a user

2

List of readers

Set the checkbox

Sets the list of control readers used for entering user access cards from the Access Manager

List of readers created in the system

Set of boolean variables

The reader will be available for entering the user access card using the control reader if checkbox is set next to the reader

The Cameras tab

№	Parameter name	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
The Filter group
1	Status	Select the value from the list	Displays the list of statuses of the Camera object to search by the value of this field	List of statuses of the Camera object	Do not use	Any—all cameras created in the system Use—only cameras that are used Do not use—only cameras that aren't used
	Name	Enter the value in the field	Sets the name of the camera to search by the value of this field	Latin and Cyrillic alphabet, digits 0-9	-	-
	ID	Enter the value in the field	Sets a unique camera identifier to search by the value of this field	Natural number series	-	-
	Server	Select the value from the list	Sets the name of the server to search by the value of this field	List of the Server objects	-	Depends on the number of the Server objects
2	The tree of Cameras objects	Automatically	Displays the list of the Camera objects	List of the Camera objects filtered in step 1	-	Depends on the number of the Camera objects filtered in step 1
The Settings group
3	Stream	Select the value from the list	Sets the camera stream that will be used to assign photos to users	-	Do not use	Do not use—camera cannot be used to input a photo Default stream—the default stream of a camera will be used Stream 1—the first stream of a camera will be used Stream 2—the second stream of a camera will be used Stream 3—the third stream of a camera will be used Stream 4—the forth stream of a camera will be used
	Compression	Select the value from the list	Sets the compression level of the selected video stream	List of compression options	Do not compress	Do not compress—compression of the camera video stream is disabled Level 1—the lowest level of video stream compression .... Level 5—the highest level of video stream compression
	Gate	Select the value from the list	Sets the Videogate object used for receiving video signal from camera	List of the Videogate objects created in the system	-	Depends on the number of the Videogate objects created in the system

The Others tab

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Full name drop-down list	Selecting the value in the list	Sets the way of defining of users record duplicates by name, surname, patronymic	List of available combinations	Not used	Not used – adding users with the same full name is allowed. Surname, name – adding users with the same name and surname and different patronymic is forbidden. Surname, name, patronymic – creating users with the same full name is forbidden.
2	External ID checkbox	Settings checkbox	Indicates whether the users records should be checked for external ID duplicates	Boolean type	No	Yes – creating users with the same external ID is forbidden. No – creating users with the same external ID is allowed.
3	PIN code checkbox	Settings checkbox
4	Vehicle license plate checkbox	Settings checkbox	Indicates whether the users records should be checked for vehicle license plate number duplicates	Boolean type	No	Yes – creating users with the same license plate number is forbidden. No – creating users with the same license plate number is allowed.
5	Recognition Server drop-down list	Selecting the value in the list	Displays a list of Face Recognition Server objects created on the Hardware tab of the System Settings dialog box	List of Face Recognition Server objects created in the system	-	Depends on number of accessible Face Recognition Server objects in the system
6	RestAPI port field	Setting the value in the field	Specifies the communication port to connect to the Face Recognition Server through the REST API. By default, it is necessary to set the 10000 value.	Number	0	-

Standard fields tab

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Name of field column	Automatic	Displays a list of standard user fields	-	Names of standard user fields	-
2	Drop-down list	Selecting the value in the list	Specifies the permissions to edit, specify, or hide the standard fields from the Access Manager interface object	-	Depends on the standard field	Edit - the field is displayed in the list of user parameters while viewing and editing and is available for editing Hidden - the field is not displayed in the list of user parameters while viewing and editing Read only - the field is displayed in the list of user parameters while viewing and editing but is not available for editing Mandatory - this field is displayed and is required when creating a new user
3	Category column	Setting the value in the field	Specifies the name of the category to which the standard field belongs	-	Depends on the standard field	Any value

Additional fields tab

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Name of field column	Automatic	Displays a list of additional user fields	-	Names of additional user fields	-
2	Drop-down list	Selecting the value in the list	Specifies the permissions to edit, specify, or hide the additional fields from the Access Manager interface object	-	Depends on the additional field	Edit - the field is displayed in the list of user parameters while viewing and editing and is available for editing Hidden - the field is not displayed in the list of user parameters while viewing and editing Read only - the field is displayed in the list of user parameters while viewing and editing but is not available for editing Mandatory - this field is displayed and is required when creating a new user
3	Category column	Setting the value in the field	Specifies the name of the category to which the additional field belongs	-	Depends on the additional field	Any value

Page tree

Documentation for ACFA PSIM