Configuring video in the Post-alarm record mode

The Post-alarm record mode is the record mode that performs recording for a specified time period upon the end of an alarm event.

By default, post-alarm recording is disabled. To enable the post-alarm recording, do the following:

1. Go to the Hardware tab in the System settings window.
2. In the objects tree on the Hardware tab, select the Camera object corresponding to the adjusted camera.
3. Select the Basic settings tab on the settings panel of the Camera object.
   
4. In the Post-alarm record field, specify the time interval in seconds during which the recording continues upon the end of an alarm event.
5. Click the Apply button.

Configuring video in the post-alarm record mode is complete.