Go to documentation repository
You can manage the panel of the Unipos7000 controller integration module in the Map window using the menu of the corresponding object.
Commands to manage the panel of the Unipos7000 controller integration module are described in the table:
| Menu command | Function |
|---|---|
| Reset panel fire | Resets panel alarm |
| Clear panel fault | Clears panel malfunction |
| Skip alarm outputs azones delay | Skips delay in alarm zones |
| Increase alarm outputs azones delay by one minute | Increases delay in alarm zones by one minute |
| Suppress active alarm outputs azones | Disables the active alarm zones of the panel |
| Suppress bui buzzers | Disables the panel buzzers |
The following states of the panel of the Unipos7000 controller integration module are possible:
| Active fires dzones |
| Fault |
| Disablements inhibits |
| Active alarm outputs azones |
| Delayed alarm outputs azones |
| Suppressed alarm outputs azones |
| Mode evacuation |
| Active delayed pzones |
| Active buis buzzer |
| Night mode |
| Disconnected |
| Connected |
| Arm |
| Disarm |
Overview
Content Tools