To set up the Alarm window position, do the following:

1. Open the «Interfaces» tab in the System Settings window (see Fig. 7.10—1, 1).
2. Select the «Traffic Monitor» object in the object tree (see Fig. 7.10—1, 2).
3. By default, the Alarm window is not displayed. To open the Alarm window, check the «Show alarm window» checkbox (see Fig. 7.10—1, 3).
4. To change the window position, enter the values in the X and Y fields (see Fig. 7.10—1, 4). The values must correspond to the coordinates of the upper left corner of the window as a percentage of the screen width and height, respectively.
5. To change the window size, enter its width in the W field and its height in the H field as a percentage of the screen dimensions (see Fig. 7.10—1, 5).
6. By default, the Alarm window cannot be moved around the screen. To enable window movement, check the «Allow movement» checkbox (see Fig. 7.10—1, 6).
7. In the «Hide after» field, enter the number of seconds that the window will be displayed until it is closed (see Fig. 7.10—1, 7).
8. Set the Alarm window transparency level using the Window transparency slider. By default, the Window transparency window is displayed opaque (minimum transparency). The transparency level increases (in percent) when the slider is moved to the right (see Fig. 7.10—1, 8).

Fig. 7.10—1 Setting up the Alarm window position

1. Click «Apply» (see Fig. 7.10—1, 9).

The Alarm window position is now set.
Note. If the text in the Alarm window overlaps the images, enlarge the window (see step 5) to the size when the text and images are displayed correctly.